FujiFilm 7129032, S800 side, space, Remedy, camera, r BUSY, camera, formatted, free space, Explanation, \MEMORY FULL, YMEMORY FULL, • Camera fault, the USET-UPmenu

Warning Displays

Warning Displayed	Explanation	Remedy
	• The Memory Card contact area is soiled.	• Wipe the contact area on the Memory Card with a
	• The Memory Card format is incorrect.	soft, dry cloth. It may be necessary to format the
		Memory Card (➝p.120). If the message still
CARD ERROR		appears, replace the Memory Card.
	• Camera fault.	• Contact your FUJIFILM dealer.
	• The Memory Card is damaged.
	• Inserted Memory Card is not compatible with your	• Insert a compatible Memory Card that is operation-
	camera.	checked at FUJIFILM Corporation.
\MEMORY FULL	The internal memory or Memory Card is full.	Erase some images in internal memory or Memory
YMEMORY FULL		Card (➝p.44), or use a Memory Card that has ample
		free space.
	• The data could not be recorded due to an Memory	• Re-insert the Memory Card or turn the camera off
	Card error or a connection error between the	and then on again. If the message still appears,
	Memory Card and camera.	contact your FUJIFILM dealer.
WRITE ERROR	• The image cannot be recorded as it is too large to	• Use a new Memory Card.
	fit in the available space on the Memory Card.
	• The Memory Card or internal memory is not	• Format the Memory Card or internal memory on
	formatted.	the camera (➝p.120).
PROTECTED CARD	The SD Memory Card switch is slide to the “Lock”	Unlock the protection by sliding it back (➝p.23)
	side.
INTERNAL MEMORY	The data could not be recorded or copied since the	Erase some images from the internal memory
IS FULL	internal memory is full.	(➝p.44), or use a Memory Card that has ample free
INSERT A NEW CARD.		space.
r BUSY	The timing for recording was incorrect because the	Use a Memory Card that was formatted on the
	Memory Card was formatted on a PC.	camera.
	The frame number has reached 999-9999.	AInsert a formatted Memory Card into the camera.
		BSet RENEW as the FRAME NO. setting in the
		USET-UP menu (➝p.117).
FRAME NO. FULL		CStart taking pictures (The frame number starts
		from “100-0001”).
		DSet CONTINUOUS as the FRAME NO. setting in
		the USET-UP menu.

150