FujiFilm AF3-007E manual Processed Film, Processing, Judging Exposure Result, Film Structure

FUJICOLOR SUPERIA 100 ¥ FUJIFILM DATA SHEET

¥Building materials, finishes used on newly-manu- factured furniture and bonding agents may pro- duce gases which affect photographic film. Do not store film, lightproof boxes of film, loaded cameras or film holders under these conditions.

¥Before use, allow films to stand at room-tempera- ture over 1 hour. Opening the package/box while film is cold may cause harmful condensation.

Processed Film

Exposure to light, high temperature and humidity can cause color changes in processed films. Therefore, place such films in sleeves and store in dark, dry, cool and well ventilated locations under the following con- ditions.

	¼ General Storage :
	25°C (77°F) at 30 to 60% RH

	¼ Long-term Storage :
	10°C (50°F) at 30 to 50% RH

NOTE As with all color dyes, those used in this film will dis- color or fade with time.

9.PROCESSING

This film is intended for processing in Fujifilm Pro- cesses CN-16, CN-16Q, CN-16FA, CN-16L, or Kodak Process C-41.

10.JUDGING EXPOSURE RESULT

SUPERIA 100 exposure results can be accurately pre- dicted by using an electronic densitometer equipped with Status M filters. An 18% gray card, receiving the same illumination as the subject, when read through the RED filter should render density readings between

0.96and 1.16 (for exposures under recommended lighting and with optimal film processing).

11.FILM STRUCTURE

12. DIFFUSE RMS GRANULARITY VALUE 4

Micro-Densitometer Measurement Aperture: 48 ∝m in diameter

Magnification: 12X

Sample Density: 1.0 above minimum density

13.RESOLVING POWER

Chart Contrast	1.6	: 1	63 lines/mm
Chart Contrast	1000	: 1	125 lines/mm

3