Troubleshooting

Problems and Solutions

Power and Batteries
Problem

 

Solution

 

The batteries are exhausted: Insert fresh or fully-charged spare batteries (P6).

The camera does not

The batteries are not in the correct orientation: Re-insert the batteries in the correct ori-

turn on.

 

entation (P6).

 

The battery-chamber cover is not latched: Latch the battery-chamber cover (P6).

 

The batteries are cold: Warm the batteries by placing them in a pocket or other warm place

 

 

and re-insert them in the camera immediately before taking a picture.

 

There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.

 

Qis selected for shooting mode: Select B mode to reduce the drain on the battery

 

 

(P18).

The batteries run down

The batteries are new, have been left unused for an extended period, or have been

 

recharged without first being fully discharged (rechargeable Ni-MH batteries only):

quickly.

 

 

Discharge Ni-MH batteries using the PDISCHARGE option and recharge them in a battery

 

 

 

 

charger (sold separately). If the batteries do not hold a charge after repeated discharging and

 

 

recharging, they have reached the end of their service life and must be replaced.

 

xTRACKING is selected for FAF MODE: Select a different AF mode (P59).

 

The batteries have been charged many times: The batteries have reached the end of its

 

 

charging life. Purchase new batteries.

The camera turns off

Insert fresh or fully-charged spare batteries (P6).

suddenly.

 

 

78