Hold the camera still Fig | FujiFilm DL-290S specification

Fig. 15	5. Hold the camera still (Fig. 15)
	When taking pictures, hold the camera still with both
	When taking pictures, hold the camera still with both
	hands (camera shake can result in fuzzy pictures).
	To shoot with the camera held vertically, position the
	Flash side up.

● Before pressing down the Shutter Release, take your finger off the Zoom Button.

● Keep your fingers and camera strap away from the Lens, Autofocus Windows, and Flash Lampface.

Fig. 16	6. Aim the autofocus spot at your subject (Fig. 16)
	● Autofocus Spot (Fig. 16 - A)
	Aim the Autofocus Spot at your subject. Make sure
	your subject fills the Finder’s Autofocus Spot
	completely.

12

Image 12

FujiFilm DL-290S owner manual Hold the camera still Fig

Contents

OWNER,S Manual Special Features Contents Names of Parts Basic Procedure Open the battery compartment cover FigInsert the battery Fig Using the Data or Time Printing Unit Check the loaded battery FigPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Open the camera back Fig Insert the film Fig Check the film tip position Fig Close the camera back Fig Turn on the power Fig Standard 35 mm size covering area Fig Zooming to telephoto Fig Zooming to wideangle Fig Hold the camera still Fig Press the shutter release about halfway down Fig Take your picture Fig END of Film After exposing the last frame Fig Unload the exposed film Fig Unloading the film in mid-roll Fig This is the picture you want but.... Fig Selecting the Exposure Mode Move the camera slightly and.... FigWord on the camera’s flash exposure modes Automatic-flash mode in low light Fig Effective flash rangeTaking ordinary pictures Red-eye reducing mode Fig If you want your subject’s eyes to look naturalBeautiful Word on red-eye effect Taking non-flash pictures Flash off mode Fig Set the self-timer Fig Start the Self-timer Fig Using the Remote Control Switch Take out the remote control switch FigWait 10 seconds Set the camera to remote control Fig Take your remote control picture Fig Effective switch range Fig Camera FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Faults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Self-timer Power SourceRemote Control Switch Others FGS-991102-Ci-01