Basic Procedure, Insert the battery Fig | FujiFilm DL-290S guide

I. BASIC PROCEDURE

LOAD THE BATTERY

●Use one 3V CR123A lithium battery.

●A new lithium battery will provide power for taking about 400 pictures, including 200 with flash (as

Fig. 1	tested according to Fujifilm’s battery testing
	procedure).

1.Open the battery compartment cover (Fig. 1)

Push the Cover’s grained part up (toward the camera back) and open the Cover toward you.

Fig. 2	2. Insert the battery (Fig. 2)
	Insert the battery in the Battery Compartment, minus
	Insert the battery in the Battery Compartment, minus
	– end first, then press in the plus + end and close
	the Battery Compartment Cover.

4

Image 4

FujiFilm DL-290S owner manual Basic Procedure, Open the battery compartment cover Fig, Insert the battery Fig

Contents

OWNER,S Manual Special Features Contents Names of Parts Open the battery compartment cover Fig Basic ProcedureInsert the battery Fig Check the loaded battery Fig Using the Data or Time Printing UnitPrinting dates or time on your pictures Fig Year Month Day Month Day Year Day Month Year Day Hour Minute Attach the Strap Fig Open the camera back Fig Insert the film Fig Check the film tip position Fig Close the camera back Fig Turn on the power Fig Standard 35 mm size covering area Fig Zooming to telephoto Fig Zooming to wideangle Fig Hold the camera still Fig Press the shutter release about halfway down Fig Take your picture Fig END of Film After exposing the last frame Fig Unload the exposed film Fig Unloading the film in mid-roll Fig This is the picture you want but.... Fig Move the camera slightly and.... Fig Selecting the Exposure ModeWord on the camera’s flash exposure modes Effective flash range Automatic-flash mode in low light FigTaking ordinary pictures Red-eye reducing mode Fig If you want your subject’s eyes to look naturalBeautiful Word on red-eye effect Taking non-flash pictures Flash off mode Fig Set the self-timer Fig Start the Self-timer Fig Take out the remote control switch Fig Using the Remote Control SwitchWait 10 seconds Set the camera to remote control Fig Take your remote control picture Fig Effective switch range Fig Camera FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Faults Possible Causes Remedies Print FAULTS, Possible CAUSES, and Remedies Faults Possible Causes Remedies Camera Care and Cautions Specifications Self-timer Power SourceRemote Control Switch Others FGS-991102-Ci-01