The Setup Menu
xPOWER MANAGEMENT | (defaults to n) |
Optimize camera performance for increased battery life or display quality.
Option | Description |
| Reduces display refresh rate. The display dims to save power if no operations |
nPOWER SAVE | are performed for a short period, but can be restored by operating camera |
| controls. Select this option to save power. |
oCLEAR DISPLAY | Choose this option for a brighter, higher quality display and for a longer delay |
| before the monitor dims to save power. |
RnPOWER SAVE does not take effect when Intelligent Face Detection is on.
UDATE STAMP | (defaults to OFF) |
Stamp the time and/or date of recording on photographs as they are taken.
Option | Description |
R+S Stamp new photographs with the date and time of recording.
RStamp new photographs with the date of recording.
OFF | Do not stamp the time and date on new photographs. |
QTime and date stamps can not be deleted. Turn UDATE STAMP off to prevent time and date stamps appearing on new photographs.
QIf the camera clock is not set, you will be prompted to set the clock to the current date and time (P16).
QWe recommend that you turn the DPOF “print date” option off when printing images with a time and date stamp (P71).
QTime and date stamps do not appear on movies, panoramas, or 3D photos.
106 | Menus |