89
Settings
4
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
TIME DIFFERENCE (time difference setting)
Press “d”or “c”to change between “ HOME”
and “ LOCAL”.
To set the time difference, select “ LOCAL”.
HOME: Your home time zone
LOCAL: Your destination time zone
1
1Press “a” or “b” to select “TIME DIFFERENCE”.
2Press “c”.
2
0102
1Press “d” or “c” to select +, –, hour and minute.
2Press “a” or “b” to correct the setting.
hAvailable time setting
–23:45 to +23:45 (in 15-minute increments)
3
0102
Continued
88
When this feature is enabled and the camera is not
used for 30 seconds, the screen temporarily turns
off (sleep mode) and the viewfinder lamp blinks at
1-second intervals to save power. If the camera
remains unused for 2 minutes or 5 minutes, it is
turned off. Use this function when you want to get
the maximum possible running time from your
battery.
●
!
The Power save setting is disabled during automatic
playback and when a USB connection is being used.
SET-UP
POWER SAVE SETTING (comsumption setting)
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files),
back up important frames (files) that you do not
want to be erased to your computer or another
media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture Card.
●
!
If “å”, “˚”, “ƒ” or
“©” appears, see P.118 for information
before formatting the xD-Picture Card.
0102
When the camera is in sleep mode, pressing the
Shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the Shutter button
wakes the camera up.
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 minutes or 5 minutes).
◆To restore power to the camera ◆
When the Auto power off function has shut the
camera down (after 2 minutes or 5 minutes):
1Set the Power switch to “OFF”.
2Set the Power switch back to “q” or “w”.
0102