111
Viewing Images
6
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on the camera.
1Set the “USB/PLAY” switch on the cradle to the
“USB” position.
2Press the “POWER” button on the cradle.
301
02
21Connect the cradle to the printer using the USB
cable.
2Set the camera into the cradle.
●
!
“PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
51Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2Press the “MENU/OK” button.
0102
4“‘” appears and then the menu
screen is displayed.
●
!
If the menu screen does not appear, check whether the “USB
MODE” setting is “ˆ”.
●
!
Depending on the printer, some functions are disabled.
110
Always press the “MENU/OK” button to complete
the settings.
●
!
Press the “DISP (BACK)” button to return to step 5.

6.4.2

Specifying images for printing without using DPOF (single-frame printing)

6.4 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER FOR

PRINTING IMAGES (PictBridge FUNCTION)

Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
To end printing, press the “DISP (BACK)” button.
●
!
Press the “DISP(BACK)” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop mid way through. When
printing stops mid-way, briefly turn the camera off and then
on again.
51Press “a” or “b” to select “uPRINT DPOF”.
2Press the “MENU/OK” button.
●
!
When “”
appears, the DPOF settings are
not specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F710 beforehand (➡P.76).
●
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
0102
●
!
Do not connect to a PC when the “USB MODE” setting is set
to “ˆ”. Refer to P.121 if you connect to PC by mistake.
11Slide the Power switch to the side to turn the
camera on.
2Set the “USB MODE” setting in the “SET-UP”
menu to “ˆ” (➡P.85).
3Slide the Power switch to the side to turn the
camera off.
0103
02

6

7