Problems and Solutions
Problem |
| Solution | |
| • | The flash is not available in the current shooting mode: Choose a different shooting mode | |
|
| (P22). | |
The fl ash does not fi re. | • | The battery is exhausted: Charge the battery or insert a | |
• | The camera is in continuous mode: Select OFF for RCONTINUOUS (P46). | ||
| |||
| • | The camera is in silent mode: Turn silent mode off (P117). | |
| • | The flash is not raised: Raise the fl ash (P41). | |
Some fl ash modes are | • | The desired flash mode is not available in the current shooting mode: Choose a different | |
| shooting mode (P22). | ||
not available. |
| ||
• | The camera is in silent mode: Turn silent mode off (P117). | ||
| |||
The fl ash does not fully | • | The subject is not in range of the flash: Position the subject in range of the fl ash (P145). | |
• | The flash window is obstructed: Hold the camera correctly (P18). | ||
light the subject. | |||
• | Fast shutter speed selected: Choose a slower shutter speed (P35, 36). | ||
| |||
| • | The lens is dirty: Clean the lens (P130). | |
| • | The lens is blocked: Keep objects away from the lens (P18). | |
Pictures are blurred. | • | sis displayed during shooting and the focus frame is displayed in red: Check focus | |
|
| before shooting (P138). | |
| • | kis displayed during shooting: Use the fl ash or a tripod (P42). | |
| • | A slow shutter speed is selected at high temperatures: This is normal and does not indi- | |
Pictures are mottled. |
| cated a malfunction. | |
• | The camera has been used continuously at high temperatures or a temperature warn- | ||
| |||
|
| ing is displayed: Turn the camera off and wait for it to cool down. |
Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler, Pictures are not recorded. turn the camera off. Leaving the camera on can result in corrupted fi les or damage to the memory
card or internal memory.
134 | Troubleshooting |