65

5

64

1Press “a” or “b” to select a menu option and

then press “d” or “c” to change the setting.

2Press the “MENU/OK” button.

You can set the SET–UP in “Q”, “w” and “T

mode.

1Press the “MENU/OK” button to display the

menu screen.

2Press “d” or “c” to select “g” OPTION and

then press “a” or “b” to select “SET–UP”.

3Press the “MENU/OK” button.

!
Press “c” for “DATE/TIME” or “RESET ALL”.
21 01
0201
0203
!
The screen shown is for still photography.
gUSING SET–UP

SET–UP Menu Options

Settings Display Explanation
POSTVIEW
USB MODE
POWER SAVE
DATE/TIME
ON/OFF
DSC/PC CAM
ON/OFF
SET
This option specifies whether or not an image checking screen (photography
results) is displayed after you take a shot.
The photography results are displayed for about 2 seconds and then automatically
recorded.
See P.67 for details.
If the camera is not used for approximately 30 seconds, this function temporarily
switches off the LCD monitor. See P.66 for details.
Use this option to correct the date or time. See P.15 for details.
Factory
default
ON
DSC
ON
QLCD ON/OFF Use this option to specify whether the LCD monitor is automatically switched ON or
OFF when the Mode switch is set to “Q”.
ON
BEEP FLOW/HIGH/OFF
This setting selects the volume of the beep emitted by the camera during camera operation.
LOW
RESET ALL OK
This resets all camera settings (including the photography and playback menu
settings) other than the date and time to the factory default values set at shipment.
When you press “c”, a confirmation screen appears. To proceed, press the
“MENU/OK” button again.
LANGUAGE
ENGLISH/FRANCAIS/
DEUTSCH
Select English, French or German as the language used for screen display.
ENGLISH

List of settings

AAUTO
SMANUAL
LCD BRIGHTNESS (P.63)
SET–UP
QStill photography mode
LCD BRIGHTNESS (P.63)
SET–UP
TMovie mode
LCD BRIGHTNESS (P.63)
SET–UP
wPlayback mode