FujiFilm FinePix A202 93, 92, For Mac OS X

5. Enter the required information in the user

registration page.

1Enter the name of your choice (nickname, etc.).

2Enter a password of your choice using letters

and/or numbers. Then enter the password again

for confirmation.

3Enter your name.

4Enter your E-mail address.

5Enter the remaining required information.

✽After you register, a confirmation E-mail message

is sent to you. Be sure to enter a valid E-mail

address at which you can receive the message.

✽The actual user registration page may differ

slightly in appearance from the sample shown

here.

6. When you have entered all the required

information, click the [Registration] button

at the bottom of the page.

Once you complete the registration, a confirmation

E-mail is sent. Wait a few moments until the

message is sent.

■For Mac OS X

To use the FinePix Internet services, users must

first register.

✽Follow the steps below to register. Users can be

registered for free.

1. Double-click the “FinePixViewer” icon in

the installed folder.

2. Click the [User’s Registration] button. The

“Operation Selection” dialog box appears.

<User’s Registration button>

3. Select “User’s registration” and click the

[OK] button.

✽If you are not already connected to the Internet,

connect now. (A dial-up dialog box may be

displayed.)

✽Only select menu acquisition if you have already

completed the user registration process and you

have re-installed “FinePixViewer”, etc.

4. The User’s Registration

dialog box opens.

Select the country or

area where you are

living and click the

[OK] button.

✽The actual user registration page may differ slightly

in appearance from the sample shown here.

✽If the country or area where you are living does

not appear in the pull-down list, select “OTHERS”.

5. When the browser starts up, proceed as

directed by the on-screen instructions.

6. Enter the required information in the user