87
Settings
86

ADAPTER SETTING

YES: Select this setting when using a conversion
lens. When selecting this setting, the “¡
icon appears.
NO :Select this setting when not using a
conversion lens.
!
Selecting the wrong setting could prevent the camera from
focusing successfully.

Overview of the conversion lens/adapter ring

Wide conversion lens WL-FX9/WL-FX9B
This is a set that includes a wide conversion lens and adapter ring and converts the camera’s focal
length by 0.79 times (equal to a 28 mm wide-angle lens). This set also allows you to use commercially
available filters.
hWide conversion lens specifications
Magnification : 0.79×
Lens configuration: 3 lenses in 3 groups
Dimensions : 70 mm (2.76 in.) dia. ×32 mm (1.26 in.)
Mass (Weight) : Approx. 185 g (6.5 oz.)
Accessories : Adapter Ring AR-FX9 (see below for specifications), Lens caps (front and rear),
Lens pouch
!
Use the lens at the wide-angle zoom setting (equal to 28 mm-46 mm).
When using the lens at the telephoto setting, the image is distorted and not be in focus.
!
The wide conversion lens and built-in flash cannot be used together.
Teleconversion lens TL-FX9/TL-FX9B
This is a set that includes a teleconversion lens and adapter ring. This accessory increases the focal
length of your lens by 1.5 times (equal to a 315 mm telephoto lens)without changing its F-stop value.
hTeleconversion lens specifications
Magnification : 1.5×
Lens configuration: 3 lenses in 3 groups
Dimensions : 65 mm (2.56 in.) dia. ×55 mm (2.17 in.)
Mass (Weight) : Approx. 100 g (3.5 oz.)
Accessories : Adapter Ring AR-FX9 (see below for specifications), Lens caps (front and rear),
Lens pouch
!
The TL-FX9/TL-FX9B should only be used for telephoto shots where eclipsing does not occur. Eclipsing occurs at
wide-angle settings.
!
The built-in flash cannot be used with the teleconversion lens.
The adapter ring is required for using commercially available filters.
hAdapter ring specifications
Compatible filters : 55 mm-diameter commercial available filters
Dimensions : 58 mm (2.28 in.) dia. ×39 mm (1.54 in.)
Mass (Weight) : Approx. 30 g (1.1 oz.)
!
Do not use more than one filter at a time.
Conversion
Lens
Adapter Ring
Adapter Ring
Filter
Mount the Adapter Ring, Conversion
Lens and commercially available
filters by screwing them on in the
direction of the arrow.
SET-UP
When this function is enabled, the screen
temporarily turns off (Sleep mode) and the indicator
lamp (green) blinks at 1-second intervals to save
power if the camera is not used for 30 seconds. If
the camera remains unused for an additional interval
(2 minutes or 5 minutes), it is turned off. Use this
function when you want to get the maximum
possible running time from your batteries.
!
The Power save setting is disabled during automatic
playback, during rechargeable battery discharging and when
a USB connection is being used.
When the camera is in Sleep mode, pressing the
Shutter button down halfway wakes the camera up.
!
Pressing any other button as well as the Shutter button
wakes the camera up.

POWER SAVE SETTING (low power setting)

To restore power to the camera

When the Auto power off function has shut the
camera down (after 2 minutes or 5 minutes):
1Set the Power switch to “OFF”.
2Set the Power switch back to “q” or “w”.
0102

FORMAT (media initialization)

Initialize (format) the media for use with the camera.
Because initializing the media erases all the frames
(files), including protected frames (files), copy
important frames (files) that you do not want to be
erased to your computer or another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the media.
!
Always check the media to be formatted on the screen before
proceeding.
hFormatted media
¨: xD-Picture Cards
ˆ: Microdrives
!
If the “å”, “˚”, “ƒ” or
©” message appears, see P.111 for
information before formatting the media.
0102
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 minutes or 5 minutes).