FujiFilm FinePix S3 6, 1, 5, 4, 3, 2, 7, 8, 9

34 35
Basic Photography
2
Single
Area AF
Dynamic
AF
TAKING PICTURES (PAuto-Multi Program)
6Set the metering system selector dial to “/”
(Matrix metering).
●
! Matrix metering indication “l” appears in the viewfinder.
●
! When shooting with the camera held vertically, see the
section on vertical shooting (➡P.36).
●
! Take care not to obscure the lens with your fingers or the
shoulder strap.
7Set the Exposure mode dial to “P” (Auto-Multi
Program).
8Brace your elbows against your body and hold the
camera with both hands.
9Position the central focus area over the subject.
●
! If the subject is outside the focus area, either move the focus
area or take the picture using the AF Lock function (➡P.40).
1Set the focus mode selector switch to “S” (Single-
AF Servo).
21Press the “FUNC” button to display the AF
setting on the rear display panel.
2Press the “F1” button to select “7” Single area
AF.
●
! Make sure to turn the focus mode selector switch until it
clicks into position.
31Unlock the 4-direction button.
2Press “d”, “c”, “a” or “b” to position the
focusing area in the center.
4Lock the 4-direction button to prevent accidental
improper use.
5Hold down the release mode switch unlock button
and set the release mode switch to “,” (Single-
frame).
●
! The selected focus area indicator appears on the top display
panel, in the viewfinder display and on the viewfinder screen
(➡P.47).
0102
01
02
Continued