FujiFilm FinePix S3 1, 3, 4, 2

52 53

Advanced Photography

PREVIEW

F1F2F3F4

This is a photography technique that allows you overlay photographed images on top of each other.

You can use this technique to compose shots that cannot be obtained normally.

1Hold down the release mode switch unlock button

and set the release mode switch to “p” (multiple

exposure). When you select multiple exposure

mode, the “p” icon appears in the viewfinder

display.

2According to the photography conditions, hold

down the “b” (exposure compensation) button 1

as you turn the Main-command dial 2to set the

exposure offset.

◆Standard compensation value in Multiple exposure ◆

In multiple exposure, a number of images are shot in the same frame. When you are overlaying

backgrounds and subjects, you must set the appropriate exposure offset before taking any shots.

hTest shooting is recommended since the

compensation actually required varies depending

on the shooting situation.

hWhen the background is completely dark and

subjects do not overlap, no compensation is

necessary for each shot.

■General guide to exposure offsets

Number of exposures

31When you compose, focus and take the shot, a

preview image appears on the LCD monitor.

2Press the “F2” button to move on to the next

shot.

hA preview image is always displayed, regardless

of the “PREVIEW” setting selected in SET-UP.

hIf you change the release mode before multiple

exposure shooting is completed, no images are

recorded.

4When you take the next (multiple exposure) shot, a

preview appears showing the overlaid images.

hTo record the image:

Press the “F1” or “MENU/OK” button.

hTo take another multiple exposure shot:

Press the “F2” button.

hTo take the shot again without using multiple

exposure mode:

Press the shutter button again.

hTo cancel multiple exposure mode without

recording the shots:

Press the “F3” or “BACK” button.

hTo check the brightness distribution:

Press the “F4” button.

CSM 11: In multiple exposure mode, one shot is taken in the frame each time the shutter button is

pressed, but continuous shooting can also be used (➡P.111). Images in continuous

shooting are overlapped in the preview display. Use the “F1”, “F3” and “F4” buttons. “K”

cannot be selected in continuous shooting.

●

Multiple exposures cannot be used when only 1 frame is shot in continuous shooting.

●

You cannot use the built-in flash for continuous shutter release.

●

See P.50 for the max. no. of consecutive shots in multiple exposure shooting.

The settings for multiple exposure shooting can

only be changed from the function menu. At this

point, the last settings specified apply.

Compensation value

pMULTIPLE EXPOSURE

RELEASE MODES