57
Advanced Features
3
56
œMULTI
Press the shutter button down halfway. The camera
recognizes any strongly contrasting subject near
the center of the screen and displays the AF frame
over the subject in focus.
●
!
When taking pictures in Macro mode, the camera focuses on
the center of the screen.
;CENTER
The camera focuses on the center of the screen.
Use this setting when taking pictures using AF/AE
lock (➡P.25).
†AREA
œMULTI
;CENTER
3When the correct exposure is measured,
“p” appears.
Press the “MENU/OK” button to confirm the setting.
●
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the batteries are
removed.
●
!
After taking the picture, check the “Color (White balance)”
setting for the image.
iSet the Power switch to “w” (➡P.27).
When “y” or “u” appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when “y” appears and a
positive value (+) when “u��� appears.
or
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
✽Displaying the menus (➡P.53)
◆Example ◆
You can change the white balance for a photographed image by using colored paper instead of white
paper.
HAF MODE Available Photography mode:
You cannot check the focus when taking pictures
using the viewfinder.
After taking the picture, play it back to check the
focus.
The AF mode can only be selected when the focus
mode is S-AF (➡P.20).
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject near the center of the image.
When the camera has difficulty focusing on the
subject in MULTI mode, set the AF mode to
CENTER and use AF/AE Lock (➡P.25).
When there is no high-contrast
subject in the center of the screen
For a high-contrast subject in
the center of the screen
Continued