115114
Specifications
System
Model Digital camera FinePix S5100/FinePix S5500
Effective pixels 4.0 million pixels
CCD 1/2.7 inch square pixel CCD
Number of total pixels: 4.23 million pixels
Number of recorded pixels Still image: 2272 ×1704 pixels/1600 ×1200 pixels/1280 ×960 pixels/
640 ×480 pixels (4/2/1/`)
Movie: 640 ×480 pixels (30 frames per second with monaural sound)
320 ×240 pixels (30 frames per second with monaural sound)
Storage media xD-Picture Card (16/32/64/128/256/512 MB)
File format Still image: Compressed: JPEG (Exif ver. 2.2)
Uncompressed: CCD-RAW (RAF)
✽Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Lens Fujinon 10×optical zoom lens, F2.8-F3.1
Aperture F2.8-F8 10 steps at wide-angle/F3.1-F9 10 steps at telephoto in 1/3 EV increments
Manual/Auto selectable
Focal length f=5.7 mm to 57 mm
(Equivalent to 37 mm to 370 mm on a 35 mm camera)
Digital zoom 2: approx. 1.4×/1: approx. 1.8×/`: approx. 3.6×
(10×optical zoom lens is used together: Max. zoom scale: 35.5×)
Focal range Normal: Wide-angle: Approx. 90 cm (3.0 ft.) to infinity
Telephoto: Approx. 2.0 m (6.6 ft.) to infinity
Macro: Wide-angle: Approx. 10 cm to 2.0 m (3.9 in. to 6.6 ft.)
Telephoto: Approx. 90 cm to 2.0 m (3.0 ft. to 6.6 ft.)
Shutter speed B/m/,/./N: 1/4 sec. to 1/2000 sec. //M: 3 sec. to 1/1000 sec.
<: 1/4 sec. to 1/1000 sec. >: 15 sec. to 1/2000 sec.
Focus TTL contrast-type, Auto focus, Manual focus
Sensitivity B: AUTO (Equivalent to ISO 64 to 320, depending on coditions) 64/100/200/400
m/,/.///N/M/</>: Equivalent to ISO 64/100/200/400
(During setting CCD-RAW: ISO 64/100/200)
Photometry TTL 64-zones metering Multi, Spot, Average
Exposure control Program AE (B,N,m,,,.,/), Shutter-priority AE, Aperture-priority AE,
Manual exposure
Exposure compensation –2.0 EV to +2.0 EV in 1/3 EV step increments
(in Programmed auto, shutter-priority auto, Aperture-priority auto)
White balance Auto (B,m,,,.,/)
Manual modes, 8 positions can be selected (N,M,<, >)
Viewfinder 0.33 inches, 115,000 pixels electronic viewfinder, Approx. 100% coverage
LCD monitor 1.5 inches, low-temperature polysilicon TFT 115,000 pixels,
Approx. 100% coverage
Flash type Auto flash using flash control sensor
Effective range: Wide-angle: Approx. 30 cm to 5.0 m (1.0 ft. to 16.4 ft.)
(Approx. 30 cm to 2.0 m (1.0 ft. to 6.6 ft.): Macro)
Telephoto: Approx. 80 cm to 4.5 m (2.6 ft. to 14.8 ft.)
Flash modes: Auto, Red-eye reduction, Forced flash, Suppressed flash, Slow
synchro, Red-eye reduction + Slow synchro
Self-timer Approx. 2 sec./10 sec.
Continuous shooting Top 3-frame: Number of recorded frames: up to 3 frames
(at intervals as short as approx. 0.3 sec.)
Final 3-frame: Number of recorded frames:
last 3 frames before releasing the shutter button
(at intervals as short as approx. 0.3 sec.)
Long-period continuous shooting
Number of recorded frames: up to 40 frames
(at intervals as short as approx. 0.6 sec.)
Shooting functions Best framing, Frame No. memory
Playback functions Trimming, Automatic playback, Multi-frame playback, Voice memo
Other functions PictBridge, Language ( , English, Francais, Deutsch, Español, Italiano, ),
FinePix photo mode (p-mode), WEB camera, Discharge batteries
A/V output NTSC/PAL selectable
Troubleshooting eIf you think the camera is faulty, check the following once more.
Frame erase does not
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Screens are not
displayed in English.
There is no image or
sound on the TV.
The TV image is black
and white.
When the camera is
connected to a PC, the
photographed image or
playback image appears
on the camera’s screen.
Nothing happens when I
use the Mode dial.
The camera no longer
works correctly.
Can’t print with
PictBridge.
The camera was
connected to a PC
when the USB mode
was set to “®”.
Some frames may be protected.
A language other than English is selected in
the “ ” setting in the “SET-UP”
menu (➡P.81).
iThe camera is not connected to the TV
correctly.
i“TV” is selected as the TV input.
iThe video output setting is incorrect.
The video output setting is incorrect.
iThe USB cable (mini-B) is not correctly
connected to the PC or camera.
iThe PC is not turned on.
iCamera malfunction.
iThe batteries have run out.
The camera has suffered an unforeseen
problem.
“®” is not selected in USB mode in the
“SET-UP” menu.
Unprotect frames using the camera on
which the protection was first applied.
1Press the “MENU/OK” button to display
the menu.
2Press “d” or “c” to select “F” and press
“a” or “b” to select “SET-UP”. Press the
“MENU/OK” button to display the SET-UP
screen on the screen.
3Press “d” or “c” to move to option 4 and
then press “a” or “b” to select
“”.
4Press “d” or “c” several times to select
“ENGLISH”.
5Press the “MENU/OK” button.
iConnect the camera and TV correctly.
iSet the TV input to “VIDEO”.
iChange the setting to “NTSC” or “PAL”
(➡P.81).
Change the setting to “NTSC” or “PAL”
(➡P.81)
iSet up the camera and the USB cable
(mini-B) correctly.
iTurn the PC on.
iBriefly remove the batteries or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
iLoad new or fully charged batteries.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If the message still appears,
contact your FUJIFILM dealer.
Select “®” in USB mode in the “SET-UP”
menu.
Perform steps 1to 3to remove the
camera from the PC.
hWindows
1The “New Hardware Found” wizard (or
“Scanner and Camera” wizard) appears.
If the wizard does not appear, proceed to
step 3.
2Click the [Cancel] button.
3Disconnect the camera from the PC.
hMacintosh
1The window for locating the driver
appears. If the window does not appear,
proceed to step 3.
2Click the [Cancel] button.
3Disconnect the camera from the
Macintosh.