83

Settings
4

82

1Press “a” or “b” to select “TIME DIFFERENCE”.
2Press “c”.
0102
WORLD TIME (TIME DIFFERENCE)
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
1
2
Press “d”or “c”to change between “åHOME”
and “ßLOCAL”.
To set the time difference, select “ßLOCAL”.
åHOME: Your home time zone
ßLOCAL: Your destination time zone
When this function is enabled and the camera is not
used for 60 seconds, the screen temporarily turns
off (sleep mode) and the indicator lamp blinks at 1-
second intervals to save power. If the camera
remains unused for 2 or 5 minutes, it is turned off.
Use this function when you want to get the
maximum possible running time from your batteries.
●
!
The Power save setting is disabled during automatic
playback, discharging and when a USB connection is being
used.
POWER SAVE SETTING

◆To restore power to the camera ◆

When the Power save function (2 or 5 minutes
setting) has shut the camera down:
1Set the Power switch to “OFF”.
2Set the Power switch back to “q” or “w”.
0102
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set time (2 or 5 minutes).
SET-UP ✽How to display the SET-UP menu (➡P.80)
FORMAT
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1Press “d” or “c” to select “OK”.
2Pressing the “MENU/OK” button erases all the
frames (files) and initializes the xD-Picture
Card.
●
!
If “7”, “w”, “0” or
“

-

” appears, see P.111-112 for information
before formatting the xD-Picture Card.
0102
1Press “d” or “c” to select +, –, hour and minute.
2Press “a” or “b” to correct the setting.
hAvailable time setting
–23:45 to +23:45 (in 15-minute increments)
0102
3
Continued