96 97
Software
Installation
9Click the [Continue] button.
●
!
The software is installed in the “Applications” folder on the installation destination disk.
10
Click the [Install (upgrade)] button.
11
Enter your administrator name and password and then click [OK].
12
An installation progress window appears. (Installation may take several minutes)
14
Launch “Image Capture” from the “Applications” folder.
8Click the [Continue] button in the “Software License Agreement” window.
13
When you have completed the installation, click the
[Restart] button.
15
Change the ImageCapture settings.
(OS X 10.1.5)
(1) Select “Other...” from “Hot plug Action”.
(OS X 10.2 or later)
(1) Select “Preferenes...” from the “Image Capture”
menu.
(2) Select “Other...” from “When a camera is
connected, open”.
16
Select “FPVBridge” from “FinePixViewer” folder in
the “Applications” folder and click the “Open” button.
17
Quit ImageCapture.
5.4 INSTALLATION ON A Mac OS X
FinePixViewer and RAW FILE CONVERTER LE are installed on Mac OS X.
1Turn your Macintosh on and start up Mac OS X. Do not launch any other applications.
2Insert the enclosed CD-ROM into the CD-ROM
drive. The “FinePix” window opens.
●
!
If the “FinePix” window does not open automatically, double-
click the CD-ROM icon.
3Double-click “Installer for MacOS X”.
4Click the “ ” icon.
(This operation is not required on version 10.2 (or
later).)
5Enter the administrator name and password. Then
click the [OK] button.
●
!
The window displayed in Mac OS X is slightly different.
6Click the [Continue] button.
7Quit any other programs that are running and then click the [Continue] button.