FujiFilm FinePix S7000 manual |

111110
(Lit red)
(Blinking red)
The camera batteries are low or completely
out of charge.
Load new or fully charged batteries.
|There is a strong likelihood of camera
shake because the shutter speed is slow.
Use flash photography. Use a tripod for some
scenes and modes.
The AF (auto focus) cannot work effectively. iIf the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
iUse AF lock to take the picture.
No media is inserted. Insert media.
Aperture/Shutter speed display
(Lit red)
Outside the AE continuous range. The shot can be taken, but the exposure will not
be correct.
iThe media is not formatted.
iThe xD-Picture Card contact area is
soiled.
iCamera fault.
iFormat the media.
iWipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
iContact your FUJIFILM dealer.
The media is fully recorded. Erase some images or use a media that has
ample free space.
iThe file played back was not recorded
correctly.
iThe xD-Picture Card contact area is
soiled.
iCamera fault.
iThe camera was bumped during movie
playback from a Microdrive.
iYou attempted to play a movie that was
not recorded on this camera.
iImages cannot be played back.
iWipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
iContact your FUJIFILM dealer.
iTurn the camera off and then on again, or use
skip playback/frame rewind.
iMovies cannot be played back.
The frame number has reached 999–9999. 1Insert a formatted media into the camera.
2Set “RENEW” as the FRAME NO. setting in
the SET-UP menu.
3Start taking pictures. (The frame numbers start
from “100-0001”.)
4Set “CONT.” as the FRAME NO. setting in the
SET-UP menu.
iThe data could not be recorded due to a
media error or a connection error
between the media and camera.
iThe photographed image cannot be
recorded as it is too large to fit in the
available space on the media.
iRe-insert the media or turn the camera off and
then on again. If the error message is still
displayed, contact your FUJIFILM dealer.
iUse new media.
A protected file was encountered. Protected files cannot be erased. Remove the
protection.
Warning Displayed Explanation Remedy
Warning Displays eThe table below lists the warnings that are displayed on the screen.
iThe xD-Picture Card contact area is
soiled.
iThe media is damaged.
iThe media format is incorrect.
iCamera fault.
iWipe the contact area on the xD-Picture Card
with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the error message
is still displayed, replace the xD-Picture Card.
iContact your FUJIFILM dealer.
Prints were specified for 1000 or more
frames in the DPOF frame settings.
The maximum number of frames for which prints
can be specified on the same media is 999.
Copy the images for which you want to order
prints onto another media and then specify the
DPOF settings.
Notes on the Media (xD-Picture Card™ and Microdrives)
■Image Memory Card
hThis Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory)
to record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as re-
recording of new image data.
hWhen using a new Memory Card, or a Memory Card
that has been initialized by a PC, be sure to initialize
(format/initialize) the card with your digital camera
before using it.
■Microdrives
Microdrives are compact, lightweight hard disk drives
that conform to the CF+ Type IIstandard. Due to their
ample capacity for large image data files and their low
per-megabyte recording cost, Microdrives provide a
more economical way to save high-resolution image
files.
■Protecting Your Data
hData may be lost or destroyed in the following
situations. Please note that FUJIFILM assumes no
responsibility for data that is lost or destroyed.
1. Removal of the memory card or turning the power
off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).
2. Improper handling and use of the memory card by
the user or third party.
hWe recommend saving your important data to
another media (i.e., MO disk, CD-R, hard disk, etc.).
■ General Notes on Handling Media (all types)
hWhen inserting the media into the camera, hold the
media straight as you push it in.
hNever remove the media or turn the camera off
during data recording or erasing (media formatting)
as this could result in damage to the media.
hData storage media are precision electronic devices.
Do not bend, drop or otherwise subject the media to
strong force or shocks.
hDo not use or store these media in environments
likely to be affected by strong static electricity or
electrical noise.
hDo not use or store media in locations subject to
high temperatures and humidity or in environments
where they are exposed to corrosive substances.
■Notes on Handling xD-Picture Card
hKeep xD-Picture Cards out of the reach of small
children. When storing xD-Picture Cards, ensure
that they are kept in a location out of the reach of
small children to prevent a card being accidentally
swallowed. An xD-Picture Card could cause
suffocation if accidentally swallowed. If a child
swallows an xD-Picture Card, seek medical advice
immediately.
hThe memory card is a precision electronic
instrument. Do not apply pressure or shock, and
avoid bending.
hDo not use the memory card in a hot, humid, or
corrosive environment.
hIf the contact area on the card is soiled (dust,
fingerprints, etc.), wipe it clean with a soft, dry cloth.
hClean the memory card with a soft dry piece of cloth
when dirty.
hxD-Picture Cards should be kept in their special
cases or carrying cases when being stored or
carried around.
hThe memory card can be used reliably for a long
period of time, but will eventually lose its ability to
store and play back image data. At this point,
replace with a new memory card.
hThe use of xD-Picture Cards is recommended with
the FinePix S7000.
The camera quality cannot be guaranteed when
cards other than those manufactured by FUJIFILM
are used.
hThe xD-Picture Card may feel warm when it is
removed from the camera after extended periods of
picture taking or image viewing. This is normal and
does not indicate a fault.
hDo not affix labels to the xD-Picture Card.
This could result in the label peeling off and causing
a fault when the card is inserted or removed.
■Notes on using Microdrive
hDo not use hard-pointed pens such as ballpoint
pens to write on the Microdrive label.
hDo not peel off the Microdrive label.
hDo not stick additional labels onto a Microdrive.
hWhen carrying or storing a Microdrive, keep it in the
protective case provided.
hWhen a Microdrive is used, vibration or impacts
during image data recording may prevent the image
data from being recorded correctly. Put the camera
down carefully when placing it on a desk or table,
etc.
hDo not use Microdrive in CF+ Type II slots that do
not have an eject function.
hTake care when handling Microdrive that have been
used for long periods as they may become hot.
hDo not place Microdrives close to strong magnetic
fields.
hKeep Microdrive dry.
hDo not apply strong pressure to the Microdrive
cover.
■Notes on Using media with a PC
hIf you intend to take photos using a media that has
been used on a PC, format the media on your
camera.
hWhen you format a media in the camera and then
shoot and record images, a directory (folder) is
automatically created. Image data is then recorded
in this directory.
hDo not change or delete the directory (folder) names
or file names on the media from your PC as this will
make it impossible to use the media in your camera.
hAlways use the camera to erase image data on a
media.
hTo edit image data, copy the image data to the PC’s
hard disk and then edit the copied data.
hDo not copy files other than those that will be used
by the camera.
■Specifications
Type Image memory card for digital
cameras (xD-Picture Card)
Memory type NAND-type flash memory
Conditions for use Temperature:
0°C to +40°C
(+32°F to +104°F)
Humidity:
80% max. (no condensation)
Dimensions 25 mm ×20 mm ×2.2 mm
(0.98 in. ×0.79 in. ×0.09 in.)
(W ×H ×D)