114 115

Specifications
System
Model Digital camera FinePix S7000
Effective pixels 6.3 million pixels
CCD 1/1.7-inch Super CCD HR
Number of total pixels 6.63 million pixels
Storage media xD-Picture Card(16/32/64/128/256/512 MB)
Microdrive (340 MB/1 GB)
File format Still image: DCF-compliant
Compressed: Exif Ver.2.2 JPEG, DPOF-compatible
✽Design rule for Camera File System compliant DPOF compatible
Uncompressed: CCD-RAW (RAF)
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Number of recorded pixels Still image: 4048 ×3040 (12.3 million) pixels/2848 ×2136 pixels/
2016 ×1512 pixels/1600 ×1200 pixels/1280 ×960 pixels
(Q/5/3/2/1)
Movie: 640 ×480 pixels (30 frames per second with monaural sound)
320 ×240 pixels (30 frames per second with monaural sound)
Lens Super EBC Fujinon 6×zoom lens, F2.8-F3.1
Focal length 7.8 mm-46.8 mm (Equivalent to 35 mm-210 mm on a 35 mm camera)
Focus TTL contrast-type, Auto focus, Manual focus
Focal range Normal: Wide-angle: Approx. 50 cm (1.6 ft.) to infinity
Telephoto: Approx. 90 cm (3.0 ft.) to infinity
Macro: Approx. 10 cm (3.9 in.) to 80 cm (2.6 ft.)
Super Macro: Approx. 1 cm (0.4 in.) to 20 cm (7.9 in.)
Shutter speed B/?: 1/4 sec. to 1/2000 sec.
?(Night scene mode only): 3 sec. to 1/250 sec.
N/M/<: 3 sec. to 1/1000 sec. >: 15 sec. to 1/10000 sec.
Bulb (Up to 15 sec.)
Aperture F2.8 to F8 10 steps in 1/3 EV increments Manual/Auto selectable
Sensitivity B: Equivalent to ISO160-800
Manual: Equivalent to ISO200/400/800 (resolution is set at 1/2/3for
shots taken at ISO 800.)
During setting CCD-RAW 200/400
Photometry TTL 64-zones metering Multi, Spot, Average
Exposure control Program AE (B, N, ?), Shutter-priority AE, Aperture-priority AE,
Manual exposure
Exposure compensation –2 EV to +2 EV (13 steps in 1/3 EV increments)
White balance Auto (B, ?)
Manual modes, 9 positions can be selected (N, M, <, >)
Viewfinder 0.44-inch 235,000 pixels electronic viewfinder Approx. 100% coverage
LCD monitor 1.8-inches, 118,000-pixel low temperature polysilicon TFT, Approx. 100%
coverage
Flash Type Auto flash using flash control sensor
Effective range: Wide-angle: Approx. 0.3 m-8.5 m (1.0 ft.-27.9 ft.)
(Approx. 0.3 m-0.8 m (1.0 ft.-2.6 ft.): Macro)
Telephoto: Approx. 0.9 m-7.9 m (3.0 ft.-25.9 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,
Slow Synchro, Red-Eye Reduction + Slow Synchro
Self-Timer 2 sec./10 sec.
Video output NTSC/PAL selectable
Input/Output Terminals
A/V output socket
2.5 mm dia. jack
USB (mini-B) socket For file transfer to a computer
DC Input Socket for specified AC Power adapter AC-5VH/AC-5VHS (sold separately)
Accessory shoe Hot shoe
Troubleshooting Possible causes Solutions
The image is blurred.
There is speckling on
the image.
Can’t format the xD-
Picture Card.
Frame erase does not
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Nothing happens when
I use the Mode dial.
Screens are not
displayed in English.
There is no image or
sound on the TV.
The camera does not
emit any sound.
When the camera is
connected to a personal
computer (PC), the
photographed image or
playback image appears
on the camera’s LCD
monitor.
The camera no longer
works correctly.
iThe lens is dirty.
iThe photographed subject was too dark.
iYou photographed scenery with Macro
mode selected.
iYou took a close-up shot without
selecting Macro mode.
iYou are shooting a subject that is not
suited to autofocusing.
The shot was taken with a slow shutter
speed (long exposure) in a high-
temperature environment.
The xD-Picture Card contact area is
soiled.
Some frames may be protected.
iCamera malfunction.
iThe batteries run out.
A language other than English is selected in
the “ ” setting in SET-UP.
iThe included A/V cable was connected
during movie playback.
iThe camera is not connected to the TV
correctly.
i“TV” is selected as the TV input.
iThe TV volume is turned down.
iThe camera volume is set too low.
iThe microphone was blocked during
shooting/recording.
iThere is something covering the speaker
during playback.
iThe USB cable (mini-B) is not correctly
connected to the PC or camera.
iThe PC is not turned on.
The camera has suffered an unforeseen
problem.
iClean the lens.
iTry standing approx. 2 m (6.6 ft.) from
your subject to take the picture.
iCancel Macro mode.
iSelect Macro mode.
iUse AF/AE lock to take the shot.
This is a characteristic of CCDs and does
not indicate a camera fault.
Wipe the xD-Picture Card contact area
with a clean dry cloth.
Unprotect frames using the camera on
which the protection was first applied.
iBriefly remove the batteries or
disconnect the AC power adapter. Then
reload the batteries or reconnect the AC
power adapter and try again.
iFit new or fully charged batteries.
1Set the Power switch to “q”.
2Set the Mode dial to “SET”. (SET-UP
screen appears.)
3Press “a” or “b” several times until a
screen with “2/3” in the top-right corner
appears and then select “ ”.
4Press “d” or “c” several
times to change the setting to “English”.
5Set the Mode dial to another mode
setting and take the shot, or set the
Power switch to “w” or “OFF”.
iConnect the camera and TV correctly.
iConnect the camera and TV correctly.
iSet the TV input to “VIDEO”.
iAdjust the volume.
iAdjust the volume.
iTake care not to block the microphone
during shooting/recording.
iEnsure that the speaker is uncovered.
iSet up the camera and the USB cable
(mini-B) correctly.
iTurn the PC on.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
Troubleshooting eIf you think the camera is faulty, check the following once more.