Shooting Mode

Advanced Anti Blur

When nis displayed, the camera will take a series of exposures and combine them to form a single image, reducing “noise” (mottling) and blur.

a

n is available when ON is selected in the shooting menu (P88) and the flash (P39) is off or set to auto.

c

Some time may be required to combine the expo- sures into a single image. A single combined image may not be created if the subject or camera moves during shooting. Keep the camera steady during shooting and do not move the camera until shoot- ing is complete.

Frame coverage is reduced.The EXR Icon

When the shutter button is pressed halfway, the camera chooses the preferred Emode:

S(RESOLUTION PRIORITY): Produces crisp, clear shots.

T(HIGH ISO & LOW NOISE): Reduces noise in pic- tures taken at high sensitivities.

U(D-RANGE PRIORITY): Increases the amount of detail visible in highlights.
EPriority
Select this mode to manually choose from the following Emodes:S (RESOLUTION PRIORITY): Choose for crisp, clear shots.

T (HIGH ISO & LOW NOISE): Reduce noise in pic- tures taken at high sensitivities.

U (D-RANGE PRIORITY): Increase the amount of detail visible in highlights.UDYNAMIC RANGE (P86) can be set to M (1600%) and D(800%).BAUTO

Choose for crisp, clear snapshots. This mode is recommended in most situa- tions.

Adv. ADVANCED

This mode combines “point-and-shoot” simplicity with sophisticated photograph- ic techniques. The AAdv. MODE op- tion in the shooting menu can be used

to choose from the following advanced modes:

24