Shooting Mode

3The first shot will be shown superimposed on the view through the lens. Using it as a guide, frame the second shot and press the shutter release button.

a

• The 3D effect may not be visible with some subjects or under

some shooting conditions. For best results, the distance the camera is moved between shots should be about 1/30th to 1/50th of the distance to the subject.

•The camera will turn off automatically if no op- erations performed for the time selected for NAUTOPOWEROFF(P102).Thefirstshotwill not be saved if the second shot is not taken be- fore the camera turns off.

Viewing and Printing 3D Images

•The camera displays images in 2D. Press the selector down to toggle between the first and second shots.

•Devices equipped for 3D display, such as the FINEPIX REAL 3D V3 digital photo frame or FINEPIX REAL 3D W3 digital camera, will display the images in 3D.

•3D prints can be ordered from http://www.fujifilm. com/3d/print/

•The supplied software displays 3D anaglyph images. 3D photos can also be viewed using other applica- tions that support the MP format.

•3D TVs that support the MP format can display im- ages in 3D. See the manual for your TV for details.

c

•Images are not output in 3D when printed directly from the camera.

•3D images are displayed in 2D in slide shows and when output on a conventional TV.

•3D images can not be edited or retouched.

Note: The MP (Multi-Picture) format is a CIPA standard for files containing multiple still images. Files in MP format are referred to as “MP files” and have the extension “*.MPO”. The camera uses this format for 3D images.

Photography on More

27