Manuals / Brands / Photography / Camcorder / FujiFilm / Photography / Camcorder

FujiFilm 16229347, HS30EXR The AE/AF LOCK Button, 2Focus, 4 Shoot, AE/AF LOCK, AE/AF LOCK, Locking Focus, 1Meter exposure, is selected for, Locking Exposure, Keeping the AE/AF LOCK

1 146

Download 146 pages, 2.64 Mb

The AE/AF LOCK Button

The AE/AF LOCK button can be used to lock exposure or focus.

Locking Exposure1Meter exposure.

Position the subject in the focus frame and press the AE/AF LOCK button to meter expo- sure.

2Focus.

Keeping the AE/AF LOCK
button pressed, press the	+
shutter button halfway
to focus. Focus and ex-

posure will remain locked while the shutter button is pressed halfway, even if you later release the AE/AF LOCK button.

Repeat steps 1 and 2 as desired to refocus before taking the picture.

3Recompose the picture.Keeping the shutter button pressed halfway, recompose the picture.

c

Adjusting zoom ends AE lock. AE lock is not avail- able with Intelligent Face Detection.

4 Shoot.Locking Focus

If AF LOCK ONLY is selected for vAE/AF-LOCK BUTTON in the setup menu (P104), pressing the AE/AF LOCK button locks focus. If AE/AF LOCK is selected, both focus and exposure will be locked.

a

If AE&AF ON/OFF SWITCH is selected for kAE/AF- LOCKMODEin the setup menu (P104), exposure and/ or focus will lock when the AE/AF LOCK button is pressed and remain locked until the button is pressed again.

Photography on More

37

Contents

Owner’s Manual Before You Begin First Steps Basic Photography and Playback More on Photography For Your Safety Page For Your Safety Be sure to read this notes before using Safety Notes WARNING Page Page CAUTION Page NOTICES About This Manual Table of Contents Table of Contents Movies Connections Page Technical Notes Troubleshooting Appendix Introduction Introduction Parts of the Camera For more information, refer to the page listed to the right of each item 72 24Tripod mount 39Selector button (see below) The Selector Button Move cursor up (e) Fn (Function) button (P53) The Electronic Viewfinder (EVF) EVF/LCD Eye sensor Bright Ambient Lighting EVF/LCD ■Shooting Introduction Playback mode indicator Dynamic range Emode Pro focus mode Hiding and Viewing Indicators Shooting Playback Histograms Optimal exposure: Pixels Attaching Accessories Charging the Battery Inserting the Battery Inserting the Battery 3Close the battery-chambercover. Press the cover down un til it clicks into place Removing the Battery Before removing the battery, turn the camera off and open Inserting a Memory Card memory cards Inserting a Memory Card 3Close the memory card slot cover Removing Memory Cards ■Compatible Memory Cards Turning the Camera on and Off Basic Setup Taking Pictures in R(EAUTO) Mode Taking Pictures in R(EAUTO) Mode 2Frame the picture Use the zoom ring to frame the picture in the display. The zoom indica tor appears Zoom ring Focus Press the shutter button halfway to focus Shoot Smoothly press the shutter button the rest of the way down to take the picture bThe Shutter Button Silent Mode The Indicator Lamp Indicator lamp The indicator lamp shows camera status as follows: Camera status Viewing Pictures Shooting Mode ■R(EAUTO) ■ EPriority ■iPRO FOCUS ■jPRO LOW-LIGHT Page • The 3D effect may not be visible with some subjects or under Viewing and Printing 3D Images •3D prints can be ordered from http://www.fujifilm. com/3d/print The supplied software 3D TVs SP1/SP2: SCENE POSITION ASCENE POSITION SP1 SP2 Scene lDOG/mCAT AUTO RELEASE rMOTION PANORAMA 1Rotate the zoom ring until the zoom indicator turns white (P18) progress bar is full and the panorama is complete Choose zfor seamless 360 ° panoramas that can be played back in a loop (P66) For Best Results P: PROGRAM AE Program Shift UDYNAMIC RANGE NISO Shutter speed S: SHUTTER PRIORITY AE speed •The shutter speed is restricted depending on the ISO setting A: APERTURE PRIORITY AE M: MANUAL The Exposure Indicator C: CUSTOM MODE KCUSTOM SET C (custom mode) Menu/setting 2ELECTRONIC LEVEL Focus Lock The AE/AF LOCK Button FMacro and Super Macro Modes (Close-ups) NUsing the Flash (Super-IntelligentFlash) Red-EyeRemoval BRED EYE REMOVAL Turning the Flash Off Optional Flash Units JUsing the Self-Timer IContinuous Shooting (Burst Mode) ■ITOP n ■PBEST FRAME CAPTURE before after ■OAE BKT ■XFILM SIMULATION BKT ■YDYNAMIC RANGE BKT dExposure Compensation Metering Focus Mode Focus Mode •Use of a tripod is recommended. Focus may be affected if the camera moves FOCUS CHECK distant object AE/AF LOCK Autofocus Mode Sensitivity White Balance The Fn Button bIntelligent Face Detection nFace Recognition Viewing, Editing, and Deleting Existing Data Face Recognition VIEW & EDIT Playback Options Playback Options Playback Zoom Press DISP/BACK or MENU/OK to exit zoom Multi-FramePlayback To change the number of images displayed, press nin single-frameview bTwo-FrameDisplay Two-framedisplay can be used to compare pictures taken in Cmode ADeleting Pictures Viewing Photo Information Image Search XPhotoBook Assist PhotoBooks Viewing PhotoBooks Editing and Deleting PhotoBooks 2Choose from the following options: •EDIT: Edit the book as described in “Creating a PhotoBook” on page EDIT Viewing Panoramas Recording Movies Recording Movies Taking Photographs during Recording Press the shutter button to take a photograph during recording •See page 88 for information on choosing how photo- graphs are recorded Movie Frame Size WMOVIE MODE Full HD (High Definition) High Definition Standard definition aViewing Movies Viewing Pictures on TV Page Printing Pictures via USB Printing Pictures via USB bPrinting the Date of Recording PRINT WITHOUT DATE) Printing the DPOF Print Order KPRINT ORDER (DPOF) 1 In the PictBridge display, press DISP/BACK to open the PictBridge menu 2 Press the selector up or down to highlight uPRINT DPOF PRINT DPOF During Printing • If the printer does not support date printing, the PRINT WITH DATE on the pictures in the DPOF print order made using the printer ■WITH DATE s/ WITHOUT DATE Number of copies bIntelligent Face Detection Repeat steps 7The total number of prints is displayed in the monitor. Press MENU/OK to exit ■RESET ALL Viewing Pictures on a Computer connect the camera to the computer until installation is complete Viewing Pictures on a Computer Exit any applications that may be running and insert the installer CD in a Windows 7/Windows Vista SETUP.EXE Yes Macintosh: Installing FinePixViewer CPU PowerPC or Intel (Core 2 Duo or better) Pre-installedversions of Mac OS X version 10.3.9–10.6 (visit Mac OS X 10.5 or earlier Preferences… Other… When a camera is connected, open FPVBridge Turn the camera on and follow the Cancel Help •Disconnect the camera before inserting or removing memory cards Uninstalling the Supplied Software Using the Menus: Shooting Mode OIMAGE SIZE [O4 : 3] Choose the image size and O4 : aspect ratio at which pictures [AUTO] D800% M1600% ing high-contrastscenes M1600% and D800% are available only when D-RANGEPRIORITY is selected in Emode dWB SHIFT R–Cy B-Ye fCOLOR [MID] ZADVANCED ANTI BLUR [ON] Select ON to enable advanced anti blur in R mode (P24) bFACE DETECTION nFACE RECOGNITION JAE BKT EV STEPS [±1/3] IFLASH [±0] gEXTERNAL FLASH Save settings for P, S, A, M and all O modes except R(P35) 2ELECTRONIC LEVEL Using the Menus: Playback Mode ■Selecting Pictures for Upload ■RESET ALL: Deselecting All Pictures ISLIDE SHOW [MULTIPLE] NORMAL FADE-IN FADE-IN DPROTECT Protect pictures from accidental deletion 1Select DPROTECT in the playback menu •SET ALL: Protect all pictures SET ALL ORESIZE CIMAGE ROTATE Create a small copy of the current picture Rotate pictures taken in tall orientation so that 1 Display the desired picture ECOPY Copy pictures from internal memory to a memory card 1Select ECOPY in the playback menu 2 Highlight one of the following options and press the selector right: : Copy pic- tures from internal memory to a memory card nERASE FACE RECOG MENU/ OK Select pictures for printing on DPOF- and Pict- Bridge-compatibledevices (P73) JDISP. ASPECT [4 : 3] The Setup Menu The Setup Menu Setup Menu Options FDATE/TIME Set the camera clock (P16) NTIME DIFFERENCE [h] RRESET NTIME DIFFERENCE BACKGROUND COLOR QVIDEO SYSTEM 2Highlight OK and press MENU/OK [CONT.] BFRAME NO Newpicturesarestoredinim BFRAME NO If the frame number reaches IPLAYBACK VOLUME [7] Adjust the volume for movie and voice memo playback JLCD BRIGHTNESS [0] LDUAL IS MODE [L] Choose from the following image stabilization options: Image stabilization on. If + MOTION + MOTION kAE/AF-LOCKMODE [P] AE&AF ON WHEN PRESSING AE&AF ON/OFF SWITCH vAE/AF-LOCKBUTTON jFOCUS CHECK tSAVE ORG IMAGE BRED EYE REMOVAL, jPRO LOW-LIGHTMODE, or iPRO FOCUS MODE mAUTOROTATE PB OBACKGROUND COLOR QVIDEO SYSTEM Choose a video mode for connection to a TV UDATE STAMP Stamp the time and/or date of recording on photographs as they are taken NTSC Optional Accessories ■Audio/Visual ■Digital viewer ■Printing ■Remote Shutter Release http://www.fujifilm. com/products/digital_cameras/index.html Caring for the Camera ■Water and Sand ■Condensation Problems and Solutions Problems and Solutions Menus and Displays Select ENGLISH for Qa(P16, 99) ENGLISH not in English No face is detected ject’s face occupies a larger area of the frame (P36) • The camera is tilted: Keep the camera level (P18) The camera is tilted • The subject’s face is poorly lit: Shoot in bright light Pictures are mottled function the camera off and wait for it to cool down Sounds made by the Intelligent Face Detection is on: Turn Intelligent Face Detection off (P54) Connections/Miscellaneous • The camera is not properly connected: Connect the camera properly (P70) The camera is not properly connected ended No picture or sound Choose OFF for TMONITOR SUNLIGHT MODE (P4) • Time and date stamps are not correct: Set the camera clock (P16) Time and date stamps stamps appearing on new photographs, select OFF for UDATE STAMP (P106) DATE STAMP Warning Messages and Displays Warning Messages and Displays cally The memory card is not formatted for use in the camera. Format the card (P100) replace the card Incompatible memory card. Use a compatible card (P14) then select CONTINUOUS for BFRAME NO. (P101) FRAME NO Exit silent mode before choosing a flash mode or adjusting the volume (P20) • More than 999 images are selected for deletion: Choose fewer images protection and try again (P94) No memory card inserted when ECOPY is selected. Insert a memory card COPY The source selected for ECOPY contains no images. Select a different source • The voice memo file is corrupt: The voice memo can not be played back The voice memo file is corrupt Internal Memory/Memory Card Capacity Specifications Metering 256-segment through-the-lens(TTL) metering; MULTI, SPOT, AVERAGE Exposure control –2EV – +2 EV in increments of 1/3 EV (except B, R, M, and U) Picture stabilization Specifications Monitor Movies 640 × Note Power sources NP-W126rechargeable battery at low temperatures Shooting weight Approx. 687 g/24.2 oz., including batteries and memory card NP-W126rechargeable battery Nominal voltage Nominal capacity Weight Rated input Color Television Systems Notices Although the monitor is manufactured using advanced Page Page Restrictions on Camera Settings