ZConnecting

Matters

Problems

Possible causes

Solutions

Page

 

 

The camera is not connected to the TV

Connect the camera and TV correctly.

120

 

 

correctly.

 

 

 

 

 

 

 

 

 

 

 

 

The included A/V cable was connected

After the movie playback mode is stopped,

109,

 

There is no image

during movie playback.

connect the camera and TV correctly.

120

 

or sound on the

 

 

 

 

“TV” is selected as the TV input.

Set the TV input to “VIDEO”.

–

Connecting to TV

TV.

 

 

 

The video output setting is incorrect.

Change the setting to [NTSC] or [PAL].

111,

 

 

 

 

 

 

113

 

 

 

 

 

 

 

The TV volume is turned down.

Adjust the volume.

–

 

 

 

 

 

 

The TV image is

The video output setting is incorrect.

Change the setting to [NTSC] or [PAL].

111,

 

black and white.

 

 

113

 

 

 

 

 

 

PC does not

The USB cable is not correctly connected

Set up the camera, and connect the USB

 

Connecting to PC

recognize the

to the PC or camera.

cable correctly.

130

 

camera.

 

 

 

 

 

 

 

 

Connecting to

Cannot print with

• The USB cable is not correctly

• Set up the camera, and connect the USB

 

connected to the printer or camera.

cable correctly.

121

printer

PictBridge.

• The printer is not turned on.

• Turn the printer on.

 

 

 

 

 

 

 

 

 

ZOthers

 

 

 

 

Matters

Problems

Possible causes

Solutions

Page

 

Nothing happens

Camera malfunction may be caused

Briefly remove the batteries or disconnect

 

 

temporarily.

the AC power adapter and DC coupler.

15, 16

 

when pressing the

 

Then reload the batteries or reconnect the

 

buttons on the

 

AC power adapter and try again.

 

 

camera.

 

 

 

Camera operation

The batteries have run out.

Load new or fully charged batteries.

15, 17

 

 

 

 

 

etc.

 

Camera malfunction may be caused

Briefly remove the batteries or disconnect

 

 

The camera no

temporarily.

the AC power adapter and DC coupler.

 

 

 

Then reload the batteries or reconnect the

 

 

longer works

 

15, 16

 

 

AC power adapter and DC coupler and try

 

correctly.

 

again. If you think the camera is faulty,

 

 

 

 

 

 

 

 

contact your FUJIFILM dealer.

 

 

 

 

 

 

Troubleshooting

149