FujiFilm Troubleshooting, Problem, Solution, Possible cause, Power and Battery

Troubleshooting

Power and Battery

	Problem	Possible cause	Solution	Page
		The batteries are exhausted.	Insert fresh or fully-charged spare batteries.	8
		The batteries are not in the correct orienta-	Re-insert the batteries in the correct orienta-	8
		tion.	tion.
	The camera does	The battery-chamber cover is not latched.	Latch the battery-chamber cover.	9
		The AC power adapter and DC coupler are	Make sure that the AC power adapter and DC
	not turn on.			—
		not connected properly.	coupler are properly connected.
		The camera has been left for an extended	After inserting the batteries or connecting the
		period with no batteries inserted and the	AC power adapter/DC coupler, wait a few mo-	—
		AC power adapter/DC coupler unplugged.	ments before turning the camera on.
			Warm the batteries by placing them in a pocket
		The batteries are cold.	or other warm place and re-insert them in the	vi
Power			camera immediately before taking a picture.
supply		There is dirt on the battery terminals.	Clean the terminals with a soft, dry cloth.	—
		The camera is in Mmode.	Select another shooting mode.	21
	The batteries run		Discharge Ni-MH batteries using the PDIS-
	down quickly.	The batteries are new, have been left unused	CHARGE option and recharge them in a bat-
		for an extended period, or have been re-	tery charger (sold separately). If the batteries	105
		charged without first being fully discharged	do not hold a charge after repeated discharg-
		(rechargeable Ni-MH batteries only).	ing and recharging, they have reached the end
			of their service life and must be replaced.
		uCONTINUOUS is selected for FAF MODE.	Select a different focusing option.	81
	The camera turns	The batteries are exhausted.	Insert fresh or fully-charged spare batteries.	8
		The AC power adapter or DC coupler has	Make sure that the AC power adapter and DC	—
	off suddenly.	been disconnected.	coupler are properly connected.

Troubleshooting

109