FujiFilm X10 Problems and Solutions, AF-C, Problem, Solution, Troubleshooting, Power and Battery, is selected for focus mode, xTRACKING is selected for FAF MODE, charge

Problems and Solutions

Power and Battery

Problem	Solution
	• The zoom ring (ON/OFF switch) is not correctly rotated: Rotate the zoom ring to OFF and then rotate the
	zoom ring again to the point between 28 and 112 (P15).
The camera does not	• The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P10).
	• The battery is inserted incorrectly: Reinsert in the correct orientation (P11).
turn on.
	• The battery-chamber cover is not latched: Latch the battery-chamber cover (P11).
	• The AC power adapter and DC coupler are connected incorrectly: Reconnect the AC power adapter and
	DC coupler.
	• The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it
	in the camera immediately before taking a picture.
	• There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.
	• oCLEAR DISPLAY is selected for xPOWER MANAGEMENT: Select nPOWER SAVE to reduce the
The battery runs down	drain on the battery (P105).
quickly.	• Ris selected for shooting mode: Select Bmode to reduce the drain on the battery (P23).
	• xTRACKING is selected for FAF MODE: Select a different AF mode (P86).
	• AF-C is selected for focus mode: Select a different focus mode (P46).
	• The battery has been charged many times: The battery has reached the end of its charging life. Pur-
	chase a new battery.
	• The zoom ring (ON/OFF switch) is not correctly rotated: Rotate the zoom ring to OFF and then rotate the
The camera turns off	zoom ring again to the point between 28 and 112 (P15).
	• The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P10).
suddenly.
	• The AC power adapter or DC coupler has been disconnected: Reconnect the AC power adapter and DC
	coupler.
Charging does not start.	Reinsert the battery in the correct orientation and make sure that the charger is plugged in (P10).
Charging is slow.	Charge the battery at room temperature (Pvi).
The charging lamp lights,	• There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.
	• The battery has been charged many times: The battery has reached the end of its charging life. Pur-
but the battery does not	chase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
charge.
	• The battery is too hot or too cold: Wait for the battery temperature to stabilize (P10).

Troubleshooting

111