FujiFilm X10 ■OAE BKT, ■WISO BKT, shots, “After”, way down, Shutter button, pressed halfway, Continuous Shooting (Burst Mode/Bracketing)

Continuous Shooting (Burst Mode/Bracketing)

4Press DISP/BACK to return to shooting mode.

5Take photographs. The camera begins record- ing while the shutter button is pressed half- way, and completes the burst when the shut- ter button is pressed all the way down. The illustration shows a burst of eight shots, three before the shutter button is pressed and four after.

			Shutter button
Shutter button			pressed all the
pressed halfway				way down
	“Before”				“After”
		shots			shots

3

•If the shutter button is pressed all the way down be- fore the number of frames selected for the “before” portion is recorded, the remaining frames will be taken after the shutter button is pressed all the way down.

•If the shutter button is pressed halfway for an extend- ed period, the camera may record the burst before the shutter button is pressed all the way down.

■OAE BKT

Press the selector left or right to highlight a bracketing amount. Each time the shutter button is pressed, the camera will take three shots: one using the metered value for exposure, the second overexposed by the selected amount, and the third underexposed by the same amount (the camera may not be able to use the selected bracketing increment if the amount of over- or under- exposure exceeds the limits of the exposure metering system).

■WISO BKT

Press the selector left or right to highlight a bracketing amount. Each time the shutter is released, the camera will take a picture at the current sensitivity (P82) and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount (regardless of the amount selected, sensitivity will not exceed ISO 1600 or fall below ISO 200).

42