Product Features and Precautions for Use

Water, Dust, and Shock Resistance

Q The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance standards, and has passed FUJIFILM drop tests (drop height: 1.5 m/4.9 ft.; impact surface: ply- wood, thickness 5 cm/2.0 in.) compliant with MIL-STD 810F Method 516.5: Shock. These results were obtained through in-house testing and are not a blanket guarantee of water resistance or invulnerability to damage or destruction. The accessories supplied with the camera are not water resistant.

Before Use

Q The front surface of the camera lens is protected by a sheet of glass. Foreign matter on the glass will appear in photographs; keep the glass clean at all times.

QBe sure that the battery-chamber is fully latched. The presence of water, mud, or sand in the camera could cause malfunction.

QDo not open or close the battery-chamber with wet hands or near water, for example while

on or by a body of water.

QBe sure the camera is completely dry before inserting or removing batteries or memory cards

or connecting the USB or A/V cable.

Q The camera does not fl oat. Be sure to attach the strap and keep it around your wrist when using the camera.

During Use

QRestrict underwater use to depths of 5 m (16 ft.) or less and periods shorter than 120 minutes. Q Do not open or close the battery-chamber cover while under water.

Q Do not use in hot springs or heated pools.

Q Do not dive into water with the camera or otherwise subject it to excessive force.

Q If the camera is left on the sand, its temperature may exceed operating limits and sand may get into the speaker or microphone.

Q Sunscreen, suntan lotion, or other oily substances may discolor the camera body and should be removed with a damp cloth.

Q The camera may lose water resistance if subjected to excessive force or vibration. Consult your retailer or a FUJIFILM-authorized repair technician.

xi