Inserting the Battery and a Memory Card

4Close and latch the battery-chamber cover. Close the cover (q) and then close the latch (w) and safety lock (e).

w e

Q Before closing the cover, confi rm that there is q

no dust, sand, or other foreign matter on the water-resistant seal or adjacent surfaces.

Q When closing the battery-chamber cover, do not subject it to excessive horizontal forces.

Failure to observe this precaution could cause the water-resistant seal to become misaligned, allowing water into the camera.

Confirming That the Cover Is Latched

Make sure that the strap is not caught in the cover and that both the latch and safety lock are closed.

■ Correct

■ Incorrect

The yellow sticker is not visible.

The yellow sticker is visible.

12

First Steps