Problems and Solutions
Problem |
| Solution | |
Some fl ash modes are | • | The desired flash mode is not available in the current shooting mode: Choose a different | |
| shooting mode (P24). | ||
not available. |
| ||
• | The camera is in silent mode: Turn silent mode off (P79). | ||
| |||
The fl ash does not fully | • | The subject is not in range of the flash: Position the subject in range of the fl ash (P108). | |
light the subject. | • | The flash window is obstructed: Hold the camera correctly (P20). | |
| • | The protective glass covering the lens is dirty: Clean the glass (P90). | |
| • | The protective glass covering the lens is blocked: Keep objects away from the lens (P20). | |
Pictures are blurred. | • | sis displayed during shooting and the focus frame is displayed in red: Check focus | |
|
| before shooting (P98). | |
| • | kis displayed during shooting: Use the fl ash or a tripod (P37). | |
| • | A slow shutter speed is selected at high temperatures: This is normal and does not indi- | |
Pictures are mottled. |
| cated a malfunction. | |
• | The camera has been used continuously at high temperatures or a temperature warn- | ||
| |||
|
| ing is displayed: Turn the camera off and wait for it to cool down. | |
Vertical lines appear in | The camera has been used continuously at high temperatures. Turn the camera off and wait for | ||
pictures. | it to cool down. | ||
“Smear”in the form of | Vertical purple or white lines may appear after the camera has been used continuously at high | ||
vertical purple or white | temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD | ||
lines appears in the | image sensors and does not indicate a malfunction. These lines are recorded in movies but do not | ||
display. | appear in photographs. Avoid framing bright objects when fi lming movies. | ||
Sounds made by the | • | uCONTINUOUS is selected for FMOVIE AF MODE: Select a different AF mode | |
| (P68). | ||
camera are recorded with |
| ||
• | Zoom was adjusted during shooting: Do not adjust zoom during shooting. | ||
movies. | • | Intelligent Face Detection is on: Turn Intelligent Face Detection off (P31). | |
| |||
94 | Troubleshooting |