FujiFilm Z1000EXR Problem, Solution, The printer is off, The volume on the TV is too low: Adjust the volume, • Input on the television is set to “TV”: Set input to“HDMI”

Problems and Solutions

Problem		Solution
	•	The camera is not properly connected: Connect the camera properly (P74).
No picture or sound when	•	An HDMI cable was connected during movie playback: Connect the camera once movie
camera is connected to		playback has ended.
TV or HDMI device.	• Input on the television is set to “TV”: Set input to“HDMI”.
	•	The volume on the TV is too low: Adjust the volume.
The computer does not	Be sure the camera and computer are correctly connected (P82).
recognize the camera.
Pictures can not be	• The camera is not properly connected: Connect the camera correctly (P76).
printed.	•	The printer is off: Turn the printer on.
Only one copy is printed/	The printer is not PictBridge compatible.
the date is not printed.
	•	Temporary camera malfunction: Remove and reinsert the battery (P14) or disconnect and
The camera is unre-		reconnect the AC power adapter/DC coupler.
sponsive.	• The battery is exhausted: Charge the battery (P12) or insert a fully-charged spare battery
		(P14).
The camera does not	Remove and reinsert the battery (P14) or disconnect and reconnect the AC power adapter/DC
function as expected.	coupler. If the problem persists, contact your FUJIFILM dealer.
I want to use an AC power	Check the label on the AC power adapter. The AC power adapter can be used with voltages of
adapter and DC coupler	100 – 240V. Consult your travel agent for information on plug adapters.
overseas.
No sound.	Turn silent mode off (P99).

116 Troubleshooting