FujiFilm Z200fd MEMO, CHECK, again, <CONT, again, <RENEW, [U SET-UP], File number, Frame number, both A and B, not return to, Directory number, internal memory used

[U SET-UP]				How to use the [SET-UP] menu (➝p.102)
		CHECK
[FRAME NO.]
					Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin				100 - 0001
again.					File number
<CONT.>	<RENEW>
A		12 / 31 / 2050		10:00 AM	Directory number
			250 F3.8
		The last 4 digits of the 7-digit number in the top right
B		corner of the LCD monitor are the file numbers, while
		the first 3 digits show the directory number.
* Formatted Memory Card or internal memory used for		MEMO
both A and B.		• Setting this function to [CONT.] makes file management
[CONT.] : Pictures are stored beginning from the highest			easier as it makes sure that file names are not
file number stored on the last Memory Card or			duplicated when images are downloaded to a PC.
internal memory used.		• When the camera settings are [ RESET] (➝p.104),
			the frame number setting ([CONT.] or [RENEW]) is
[RENEW] : Pictures are stored on each Memory Card
			changed to [CONT.] and the frame number itself does
beginning with a file number 0001.			not return to 0001.
Each image will be numbered consecutively		• In [CONT.] setting, images are stored beginning from
from the last number used. So when recorded			the highest file number on the current Memory Card
images in the Memory Card are erased, the			when the Memory Card already contains image files
number of the erased frame will not be used			with file numbers higher than the highest file number on
again.			the last Memory Card.
		• The displayed frame number may differ for images
			photographed on other cameras.

106