BPress the shutter button down fully to take pictures.

Click

Fully pressed

CHECK [ FACE DETECTIONbREMOVAL ON]

When a picture is taken with [ FACE DETECTION bREMOVAL ON] set, the red-eye effect will be detected and corrected before the image is recorded. When a picture is taken with [ FACE DETECTION bREMOVAL OFF] set, the image is recorded without the red-eye effect.

Using the Dual Image Stabilizer function when taking pictures

Camera shake and blurring (of moving subject) can be reduced by the image stabilizer function and a high sensitivity setting. Both camera shake and blurring are reduced when B is selected for the shooting mode. Only camera shake will be reduced when any other shooting mode is selected.

Available Photography modes: All (except for )APress to activate Dual IS (image stabilization)mode. Press again to set Dual IS mode OFF.

Camera the Using

REMOVING

Red-eye effect in an image will be detected after the shooting.

or will be displayed when Dual IS mode is activated.

Subjects not suitable for Intelligent Face Detection

Intelligent Face Detection automatically focuses on a face(s) turned towards the camera. However, difficulties will occur with the Intelligent Face Detection mode in the following situations:

The face is obscured by glasses, sunglasses, a hat, or hair.A person turned sideways, or who has their head tilted.The subject is too far away to recognize a face.

Intelligent Face Detection will not work in cases where the subject is standing on his/her head, is not a person (pet or other animal), or if the camera is not held correctly.

For such subjects use AF/AE lock (p.34).

CHECK

The Dual IS mode can be set to [ CONTINUOUS] or

[ SHOOTING ONLY] under [ DUAL IS MODE] in the [SET-UP] menu (p.107).

Continued Q

33