Manuals / Brands / Photography / Digital Camera / FujiFilm / Photography / Digital Camera

FujiFilm Z200fd Double, beepBeep, Halfway pressed, Available Shooting modes: All, BTake pictures in selected time, Set the self-timersetting to [10 SEC] or [(2 SEC] (➝p.63)

1 166

Download 166 pages, 4.06 Mb

[ 10 SEC]/ [(2 SEC]

Available Shooting modes: AllSet the self-timer setting to [ 10 SEC] or [(2 SEC] (➝p.63).

APress the shutter button down halfway to focus on the subject and press the shutter button fully.

Double

beepBeep

Halfway pressed

Fully pressed

Pressing the shutter button down halfway that focuses on the subject.

Without releasing the shutter button, press the button all the way down (fully pressed) to start the self-timer.

BTake pictures in selected time.

A picture is taken after the self-timer lamp changes from lit to blinking (only blinks with the 2-second self- timer).

Photography — Features Advanced

A countdown appears on the LCD monitor indicating the time remaining until the picture is taken.

Continued Q

Contents

Page For customers in the U.S.A FCC Statement CAUTION For customers in Canada Be sure to read this page before using the software End User License Agreement Page Disposal of used Electrical & Electronic Equipment product In Countries outside the EU: Using Intelligent Face Detection/Red-eye Using the erase button ( /n) Moving or Copying the Images Using the Shooting Functions — Procedure of Setting Sending and receiving images images ([ TRIMMING FOR BLOG]) Setting the [PLAYBACK MENU] Setting automatic playback Selecting the type of image transition Usable Memory Cards ZAbout marks CAUTION: CHECK: MEMO: ZUsable Memory Cards ZNote ZUsing the Wheel Dial Changing folders (➝p.28) • Rechargeable Battery NP-45(1) •Strap (1) •Battery Charger BC-45(1 set) • A/V cable (1) •USB cable (1) AShutter button BON/OFF switch/Lens cover CIntelligent Face Detection/bRed-eyeRemoval button (p.32) DFlash (p.60) EMicrophone ZPhotography mode ZPlayback mode ZCompatible battery Rechargeable Battery NP-45(1) Terminals Indicator •See “Basic Manual” for information on the battery Z<Charging Indicator and Statuses Charging Status Action Battery not loaded 1 Open the battery cover CHECK 2 Load the battery Battery release catch Align the orange parts 3 Close the battery cover To remove the battery Battery release catchGetting Ready MEMO xD- Picture Card SD Memory Cards/SDHC Memory Cards They are operation-checkedat FUJIFILM Corporation. Manufacturer: SanDisk •The camera is not compatible with multimedia cards 2 Insert an xD-PictureCard Protection Switch How to replace the Memory Card Loading the Memory Card •Operation of this camera is only guaranteed when it is •See p.132 for information on the xD-PictureCard and the internal memory •See p.151 for information on the standard number of available frames ZAbout internal memory • Power-ON • Power-OFF Changes between Shooting mode and Playback mode •Avoid pressing the lens cover to prevent damaging the surface of the camera ALeave the lens cover closed 1 [] screen appears when turning the camera on 2 Set the date and time 3 Change the date format ASelect the date format BSet the format CAlways press MENU/OK after the settings are completed Date format Page 1 Open the [SET-UP]menu 2 Display the [DATE/TIME] screen 2 Display the [] screen Set Silent mode pressing and holding DISP/BACK •Press and hold DISP/BACK again to release Silent mode •Flash will light only in Natural & dmode •Release Silent mode to change flash mode or sound volume This section describes the basic operations Refer to p.51 for setting AUTO Mode 1 Turn the camera on AOpen the lens cover completely so that it will not move further 2 Select the folder Holding the camera correctly Brace your elbows against your sides and hold the camera with both hands Do not cover the lens or flash with your fingers T button (Zoom out) 5 Press the shutter button fully Double beepClick AF frame •Not focus on the subject No sound Flash When selecting a slow shutter speed that will cause camera shake See ZIndicator lamp display Indicator lamp When there are multiple people in the frame Intelligent Face Detection allows you to focus on and adjust the brightness of people’s faces. Intelligent Face focusing priority BPress the shutter button down fully to take pictures CHECK [ FACE DETECTIONbREMOVAL ON] Available Photography modes: All (except for ) APress to activate Dual IS (image stabilization) mode. Press again to set Dual IS mode OFF 1 Move the camera slightly so that one of the subjects is in the AF frame 2 Press the shutter button down halfway to focus on the subject •AF/AE lock can be applied repeatedly before the shutter is released Subjects not suitable for autofocus following: Usingthe Camera Very shiny subjects such Fast moving subjects as a mirror or car body Select the LCD monitor display Press DISP/BACK to change the LCD monitor display Text displayed Framing guideline displayed Press wduring shooting to change to Playback mode When pressing •When playing back images shot with a camera other than FinePix Z200fd, “” (present icon) appears on the LCD monitor CAUTION Still images viewable on FinePix Z200fd ZSetting the password ZInputting password 1 Zoom in / Zoom out W button (Zoom out) Zoom bar 2 Display another part of the image Navigation screen (Current displayed image) Page •The [PRIVATE] folder with a password set cannot be displayed In sorting by date mode (➝p.37), you can view all images taken on the same day AMove the cursor (colored frame) to the selecting frame In sorting by date mode, images in one folder are displayed in order of date To display all images in the camera, use micro thumbnails playback Page Playback mode (➝p.37) Page G Erasing the Images/Movies erased the frames (files) before erasing them (➝p.88) • [DPOF SPECIFIED. ERASE OK?] or [DPOF DPOF specified files is attempted BSelect [MOVE/COPY] CPress MENU/OK to move to menu item Copying images to another Memory Card ASelect [MOVE] BPress MENU/OK to open the folder selecting screen Moving or Copying the Images DPress MENU/OK to move the currently displayed frame (file) Images to move can also be selected after selecting a folder to move in step •When moving frames (files) is completed, press DISP/ BACK ASelect [MOVE ALL] Page Page 1 Select the Shooting mode Set the Shooting mode from the top menu The camera settings are tailored to the scene being shot ZSpecifying functions using buttons Intelligent ZSpecifying functions using [SHOOTING MENU] Page This is the easiest mode for providing crisp and clear shots Use this mode for ordinary photography Do not move the camera until the shooting ended •Continuous shooting is disabled when setting Flash cannot be used in the Natural light mode <Setting frames Advanced Use this mode for shooting evening and night scenes A picture is taken with a slow shutter of up to 3 seconds Use this mode to shoot fireworks It is effective for taking more vivid shots of fireworks with a slow shutter •Flash cannot be used in the Fireworks mode Page Page Use this mode to take close-up shots p.54, 55, 57, 58) Press e (p) to select Macro mode. Press e (p) again to cancel Macro mode MEMO What is Intelligent Flash The Intelligent Flash feature is always used when shooting with flash The flash setting changes each time you press d(q) The flash fires as required by the shooting conditions This mode is suitable for shooting portraits in low-lightconditions Available flash modes in Photography modes d Setting the Flash (Intelligent Flash) When [ FACE DETECTION bREMOVAL ON] is set: CAUTION Notes on using flash •If pressing the shutter button while the flash is charging •The flash charging time may increase when the battery is low on charge Available Shooting modes: [AUTO], , , H , , , , , s Available Shooting modes: [AUTO] , H , , , , s Available Shooting modes: All Set the self-timersetting to [10 SEC] or [(2 SEC] (➝p.63) beepBeep Pressing the shutter button down halfway that focuses on the subject BTake pictures in selected time Using the 2-second self-timer To stop the •Any of the following cancels [10 SEC] or [(2 SEC] setting: -Completing the shooting -Changing the Photography mode setting BSelect [SHOOTING MENU] CPress MENU/OK to open the [SHOOTING MENU] DSelect the menu EMove to setting item FChange the setting Setting the shooting menu (➝p.67) ZList of SHOOTING MENU options Menu Functions HIGH-SPEED Shooting mode: [AUTO], , H Shooting mode: Shooting mode: s Setting the shooting menu (➝p.67) Available Shooting modes: All (except for , .) (➝p.54 – 58) All will continue to take pictures available space on the Memory Card or internal memory Available Shooting modes: All (except for , ) (➝p.54 – 58) [SHOOTING MENU] Shooting continues as long as holding the shutter button down Max.40 shots Press shutter button 3 frames Available Shooting mode: , s (➝p.55, 58) Guide to compensation [AUTO]: Automatic adjustment 6: Shooting outdoors in good weather 7: Shooting in shade 9: Shooting under Daylight fluorescent lamps 0: Shooting under Warm White fluorescent lamps Area shot and quality setting Area shot excluding Area shot with Use this menu to specify required color tone It is effective for taking vivid shots or black and white shots FinePix COLOR settings [p-STANDARD] are set to standard Available Shooting mode: s(➝p.58) (When Intelligent Face Detection is turned OFF) Use this mode to specify focusing mode that best suits the subject : [MULTI] Page APress wto set the camera to Playback mode (➝p.37) BPress (o) to open the [IR MENU] CSelect [ IR COMMUNICATION] DPress MENU/OK Refer to the manual provided with each device for more information Page Page MEMO Trimming Images Page ASelect the frame (file) to save BPress (o) to save the image Saved blog images cannot be rotated or trimmed ZList of the [PLAYBACK MENU] options Setting the playback menu (➝p.85) •To interrupt [SLIDE SHOW], press MENU/OK •You can select BGM during slide show •Scrap book view will select the size and position of the images automatically •The Auto power off function (➝p.110) does not operate during a slide show Use this mode to rotate an image and to display correct direction An image can be rotated only when playing back using FinePix Z200fd ASelect the frame (file) to rotate BPress MENU/OK to open the [PLAYBACK MENU] CSelect [ IMAGE ROTATE] To protect or unprotect only the selected frame (file): Unprotected Protected (Fappears) ASelect the protecting/unprotecting frame (file) BPress MENU/OK to protect/unprotect the currently displayed frame (file) MEMO To stop the procedure midway Voice memos of up to 30 seconds can be added to still images APress wto set the camera to Playback mode (➝p.37) BSelect the image to add a voice memo CPress MENU/OK to open the [PLAYBACK MENU] Remaining time Microphone Select an image file with a voice memo. # appears on the LCD monitor (Setting the camera to wPlayback mode (➝p.37)) ZPlaying back voice memos Control Description [WITH DATEE] : The date will be imprinted on your prints [WITHOUT DATE] prints [RESET ALL] •When DPOF settings were specified on another camera •Prints of up to 999 frames (files) can be ordered on the same Memory Card •DPOF settings cannot be specified for movies Make sure to press MENU/OK when your settings are complete Page Z[uPRINT ORDER (DPOF)] W button T button (Zoom out) •Pressing DISP/BACK in step A or B returns to single- frame playback A saved image size varies depending on the zoom scale of step •Image sizes Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) A5 size 1 Set the camera to r Movie mode ZZooming the image 2 Record movies CHECK Recording movies rRecording Movies Press MENU/OK to open the top menu to select SHOOTING MENU] ASelect CChange the setting Setting the camera to w ZPlaying back movies Pauses the movie during Press por qwhile playback is Playback starts automatically 2 Change the page 3 Change the setting How to use the [SET-UP]menu (➝p.102) Setting Factory default Explanation Page [U SET-UP] FORMAT] Initializes a Memory Card or internal memory Select this menu to erase all the frames (files) Specifies the language used for LCD monitor [3 SEC]/[1.5 SEC]: The image appears for about 3 or 1.5 seconds and is then recorded [ZOOM (CONTINUOUS)]: The image appears enlarged. Use this mode to check details of image •[IMAGE DISP.] cannot be used when [hLONG PERIOD] (➝p.72) is set Frame number Use this function to specify whether frame numbers are assigned consecutively from previous numbers or begin File number <CONT [CONTINUOUS]: The Dual Image Stabilization function is activated always at photography mode [SHOOTING ONLY]: Use this function to shoot enlarged images than maximum optical zoom scale ZZoom bar display [STANDARD]: [POWER SAVE]: Page Initialize (format) the Memory Card or internal memory for use with the camera Place of initialize [Y FORMAT OK?]: Internal memory [\ FORMAT OK?]: 1 Use Time difference function 2 Move to [TIME DIFFERENCE] screen 3 Set time difference Available time setting Connection Camera 1 Connect the camera to your printer using the USB cable 3 The following screen appears on the LCD monitor after a moment PRINT setting To specify more PRINT settings, repeat steps Aand B CPress MENU/OK to display the confirm setting MEMO Printing with date APress DISP/BACK to Page Disconnecting the printer ZHard ware (software) requirements and recommended system requirement Recommendation Windows 2000 Professional (Service Pack 4 or later) Windows XP 1 Install FinePixViewer as instructed by the on-screeninstructions Launching the installer manually ADouble-clickthe [My Computer] icon *Windows XP users should click [My Computer] in the [Start] menu Windows Vista users should click [Computer] in the [Start] menu ZHardware and software requirements Compatible Mac*1 Power Macintosh G4, iMac, iBook Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5 MacBook, MacBook Pro, Mac mini, or Mac Pro Double-click on [Installer for MacOS X] 6 Install FinePixViewer as directed by the on- screen instructions Installation Software 8 Launch [Image Capture] from the [Applications] folder 10Select [Other...] from [When a camera is connected, open] 12Select [Quit Image Capture] menu in the [Image Capture] menu FinePixViewer Overview ZOperation of image transmission by USB (Windows only) AInsert the Memory Card with images into the camera (➝p.18) You can use the xD-PictureCard and the SD Memory Card with the FinePix Z200fd In this manual, these cards are expressed as “Memory Card” Connecting to a PC •Auto power off is disabled during USB connection •Before replacing the Memory Card, always disconnect the camera from the PC •Always use FinePixViewer to transfer images with voice memos to a PC Always use the FUJIFILM AC Power Adapter •You can only see images saved on a PC. Save images on a PC Proceed to “Using FinePixViewer” (➝p.126) CAUTION (Mac OS X) Note on disconnecting the camera is not exchanging data •What is explained in [How to Use FinePixViewer] Example: Looking up slide shows Windows Macintosh SD/SDHC •xD-PictureCard Use the following xD-PictureCards: 256MB/512MB/1GB/2GB •AC Power Adapter AC-5VX Use AC-5VXAC adapter with CP-45DC Coupler together for FinePix Z200fd •CompactFlash™ Card Adapter DPC-CF • Waterproof Case WP-FXZ100 •Soft case ZPlaces to Avoid Do not store or use the camera in the following types of locations: •In the rain or in very humid, dirty, or dusty places •Extremely cold places •Places with strong vibration ZHandling Memory Card •The use of xD-PictureCards is recommended with FinePix Z200fd MEMO Type M and H of xD-PictureCard •Type M FinePix Z200fd is compatible with Type M The table below lists the warnings that are displayed on the LCD monitor Warning Displayed Remedy The battery is low or completely out of charge V(Blinking red) Warning Displays • The Memory Card format is incorrect • The Memory Card is damaged [\MEMORY FULL] The internal memory or Memory Card is full • This file cannot be played back • The movie and image cannot be played back movie that was not recorded on this camera [TOO MANY FRAMES] by date sorting DPOF frame settings be specified on the same Memory Card is DPOF settings DPOF printing cannot be used with this image an image that is not supported by DPOF • The image format is not transmittable • A movie can not be sent is displayed) • Transmission was disconnected during IR communication ZGetting ready Matters Problems Possible causes Solutions There is no battery in the camera Load the battery begin The charging The battery terminals are soiled ZShooting pressing the shutter button Cannot use the flash Continuous shooting is selected Set continuous shooting to OFF Page ZPlaying back ZConnecting ZOthers Camera malfunction may be caused temporarily reload the battery or reconnect the AC buttons on the Model Digital camera FinePix Z200fd Effective pixels 10 million pixels CCD Sensitivity Photometry TTL 256-zonesmetering Exposure control Program AE Specifications White balance Fluorescent (Cool White), Incandescent) Self-timer Couple timer/ Group timer/Approx. 2 sec./10 sec Power supply separately) Guide to the number of available frames for battery operation Battery Type Number of frames Nominal voltage Nominal capacity Operating temperature Dimensions Mass (Weight) Quality setting Number of (approx.52 MB) 128 MB 256 MB Page Frame rate (fps) JPEG Motion JPEG Smear WAVE Page Page FUJIFILM Digital Camera Worldwide Network Page Page Page Page Page Page Page http://www.fujifilm.com/products/digital_cameras/index.html http://www.fujifilm.com/products/ digital_cameras/index.html ■ Handling the Battery *Conﬁ rm your battery type before reading the following descriptions 1Camera uses the Rechargeable Lithium-ionBattery ■Battery Features