Fujitsu 8000 SERIES user manual CDs

9 CDs

This section explains how to handle, insert, and remove CDs.

■Notes on handling

To prevent faults, note the following when handling CDs.

●Notes on handling CDs

•Do not use a ball-point pen or pencil on the label (printed side). Do not affix a label.

•Do not touch or damage the data side.

•Do not bend or compress them.

•If the CD gets dirty or wet, wipe it with a dry soft cloth from the center to the edge. Do not use a cleaner.

•Keep them dry.

•Do not place them in an extreme temperature environment.

•Do not place them in a humid and dusty environment.

●Notes on using the drive

•Do not use CDs that do not meet the requirements in “Notes on handling CDs,” or those warped, damaged, or cracked. Otherwise, a fault may occur. Faults caused by the use of a defective CD shall not be covered by the warranty.

•This PC can use circular CDs only. Do not use odd-shaped CDs. Otherwise, a fault may occur. Faults caused by the use of an odd-shaped CD shall not be covered by the warranty.

•Use of a commercially available CD-ROM cleaning disc may place dust on the lens. Do not use a CD-ROM cleaning disk.

￿Point

•CD-ROM is a compact disc (CD) that stores PC information (such as characters) rather than music. ROM stands for Read Only Memory. This PC can read data from CD-ROMs but cannot write data, except when CD-R/RW is selected as a custom-made option.

•This PC can use CDs having any of the following marks. Do not use CDs without a mark. Otherwise, a fault may occur.

An additional application may be necessary to use particular types of CDs.

* ASTERISKED CDS CAN ONLY BE USED ON CD-R/RW DRIVES TO WRITE DATA.

23