10Install the side cover.
11Set the installed hard disks using BIOS Setup.
Set the type of the installed internal hard disk using
Point
•To remove hard disks, reverse the procedure for installing them.
•After installing the first internal hard disk, use the attached Recovery
•After installing the second internal hard disk, configure as follows:
-For Windows NT model
On Disk Administrator, configure partitions and format the hard disk. Disk Administrator is activated by clicking the [Start] button, [Program], then [Administration tools (common)].
-For Windows 2000 model
On Disk Administrator, configure partitions and format the hard disk. Administrate the Disk is under the Storage Area displayed by clicking the [Start] button, [Program], then [Administrate the Computer].
■Installing a disk in the front access bay
In installing the hard disk drive in the front access bay, see “Installing Other Devices”.
Point
•To remove hard disks, reverse the procedure for installing them.
•After installing the first internal hard disk, use the attached Recovery
•After installing the second internal hard disk, configure as follows:
-For Windows NT model
On “Disk Administrator”, configure partitions and format the hard disk. “Disk Administrator” is activated by clicking the [Start] button, [Program], then [Administrative tools (common)].
-For Windows 2000 model
Using “Disk Management”, configure partitions and format the hard disk. “Disk Management” is under Storage branch displayed by clicking the [Start] button, [Program], then [Computer Management].
50
