ADA-16FX-ETHERNET

Chapter 2 Overview

2 Overview

2.1Abstract

The ADA-16FX-ETHERNET is an adapter board that can be used together with the evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET extends the evaluation board with Ethernet connectivity. It can be used for software development and testing.

The board allows the designer immediately to start with the software development before a final target system is available.

2.2Features of adapter board ADA-16FX-ETHERNET

<10BaseT Ethernet connectivity

- Software example including openTCP stack is available

<Multiplexed bus interface

<Selectable chip select via Jumper

<Pin header for SK-16FX-EUROSCOPE (SK-16FX-100PMC) base board

(Note: SK-16FX-EUROSCOPE has to be ordered separately)

2.3Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC)

<1x UART-Transceiver (SUB-D9 connector)

<1x USB to serial converter (Type-B connector)

<1x High-speed CAN-Transceiver (SUB-D9 connector)

<2x LED-Display (7-Segment)

<2x User-button

<1x Reset-button, Reset-LED

<All 100 pins routed to pin-header

<On-board 5V and 3V voltage regulators, Power-LED

<USB power-supply (external power supply possible)

This board must only be used for test applications

in an evaluation laboratory environment.

© Fujitsu Microelectronics Europe GmbH

- 5 -

UG-960011-11

Page 5
Image 5
Fujitsu manual Overview, Abstract, Features of adapter board ADA-16FX-ETHERNET