ADJUSTING THE DIRECTION OF AIR CIRCULATION
Vertical
Whenever making horizontal airflow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are stopped.
Vertical Air Direction Adjustment
Press the SET button (Fig. 5 L).
Each time the button is pressed, the air direction range will change as follows:
RDANGER!
●Never place fingers or foreign objects inside the outlet ports, since the internal fan operates at high speed, and personal injury could be caused.
1 2 3 4 5 6
Types of Air flow Direction Setting:
1, 2, 3, 4, 5, 6 : During Heating/Cooling/Dry modes
The Remote Controller's display does not change.
1 2 3
4 5 6
●Use the air direction adjustments within the ranges shown above.
●The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
During Cooling/Dry mode : Horizontal flow 1
During Heating mode | : Downward flow 6 |
●During AUTO mode operation, for the first a few minutes after beginning op- eration, airflow will be horizontal 1; the air direction cannot be adjusted during this period.
The air flow direction setting will temporarily become 1 when the temperature of the air flow is low at the start of the Heating mode.
●Always use the Remote Controller's SET button to adjust the vertical air- flow louvers. Attempting to move them manually could result in improp- er operation; in this case, stop opera- tion and restart. The louvers should begin to operate properly again.
●During use of the Cooling and Dry modes, do not set the Airflow Direc- tion Louvers in the Heating range (4 - 6) for many hours, since water vapor may condense near the outlet louvers and drops of water may drip from the indoor unit. During the Cool- ing and Dry modes, if the Airflow Di- rection Louvers are left in the heating range for more than 30 minutes, they will automatically return to position 3.
●When used in a room with infants, children, elderly or sick persons, the airflow direction and room tempera- ture should be considered carefully when making settings.
Right-Left Adjustment
Adjust the
●Move the
RCAUTION!
●When adjusting the
knob
knob(two places)