Fujitsu AP-600RP-USB manual Content, Introduction, WLAN Security, Inform ‚ October

Inform ‚ October 2003

CONNECT2AIR™ WLAN

AP-600RP-USB

Configuration schemes

Category: CONNECT2AIR WLAN Content: Config. schemes

Content

1.Introduction

2.WLAN Security

3.AP-600RP-USB with ADSL Router

4.AP-600RP-USB with ADSL Router advanced

5.AP-600RP-USB with ADSL Modem

6.AP-600RP-USB with CABLE Modem

7.Two AP-600RP-USB in repetition mode (WDS)

1.Introduction

The AP-600RP-USB offers a wide range of configuration possibilities due to the extended feature set. This paper helps you to manage more complex configuration schemes and helps you in configuring your AccessPoint as well as other devices in the network, like ADSL Routers.

Novices and Professionals will find appropriate information, depending on their knowledge. You will find an overview on how the configuration should like. Compare it with your settings and adopt it. No step-by-step installation is provided with this paper, so please consult the manual provided with the product or download it from http://www.driver-cd.com Æ Accessories Æ Wireless LAN Æ AP-600RP-

USB

Important: Before starting with configuring your device, please make sure that you download the latest Firmware from the support homepage: from http://www.driver-cd.com Æ Accessories Æ Wireless LAN Æ AP-600RP-USB

2. WLAN Security

To protect your intellectual property, secure your wireless connection! This AccessPoint is equipped with a sophisticated security algorithm to protect against intruders entering your system or listening to what you are transferring over your network.

It is highly recommended to have at least Wired Equivalent Privacy (WEP) with 128 bit enabled.

Refer to the manual in order to get information about how to secure your WLAN or visit

http://www.fujitsu-siemens.com/mobility .

www.fujitsu-siemens.com