Fujitsu AP-600RP-USB with CABLE Modem, Cable Modem, Connecting the devices to the AP-600RP-USB

Inform ‚ WLAN ‚ AP-600RP-USB Configuration schemes ‚ Issue October 16th 2003

Page 5 of 6

6.AP-600RP-USB with CABLE Modem

43

2

1

3

( 1 ) Cable Modem

The Cable Modem does not have to be configured.

( 2 ) AP-600RP-USB

WAN:	dynamic IP address
LAN:	static IP: 192.168.1.254
DHCP	on: 192.168.1.10 - 90
	GW: 192.168.1.254
	DNS: auto
Routing:	on (cable from Modem
	connected to the WAN
	interface)
SSID:	CONNECT2AIR

( 3 ) Notebook

TCP/IP: get IP and DNS address automatically

SSID: CONNECT2AIR

Data Rate: auto

Connecting the devices to the AP-600RP-USB:

1 4

Connect the CABLE Modem to the WAN port. Additional networking devices like network printers, servers or scanners can be plugged to one of the free LAN ports and will be integrated in the IP segment of 192.168.1.X.

Installation Note

Beside ADSL, most broadband Internet connections are nowadays established over CABLE Modem (TV cabling). This case describes using an CABLE modem in connection to the WLAN AccessPoint. The configuration is quite easy and allows you to share one single Internet connection with several other Clients.

CABLE Modem:	AP-600RP-USB:
- establishing Internet connection	-	DHCP Server
	-	handling the wireless LAN (WLAN) access
	-	NAT Routing, Firewall are active