Fujitsu AP-600RP-USB with ADSL Router, Connecting the devices to the AP-600RP-USB, Notebook

Inform ‚ WLAN ‚ AP-600RP-USB Configuration schemes ‚ Issue October 16th 2003

Page 2 of 6

3.AP-600RP-USB with ADSL Router

43

2

1

3

( 1 ) ADSL Router

WAN:	PPPoE over ADSL
LAN:	static IP: 192.168.1.1
DHCP	on: 192.168.1.10 - 90
	GW: 192.168.1.1
	DNS: auto

( 2 ) AP-600RP-USB

WAN:	no ISP
LAN:	static IP: 192.168.1.254
DHCP	disabled
Routing:	off (cable from Router
	connected to the LAN
	interface)
SSID:	CONNECT2AIR

( 3 ) Notebook

TCP/IP: get IP and DNS address automatically

SSID: CONNECT2AIR

Data Rate: auto

Connecting the devices to the AP-600RP-USB:

X

14

Connect the ADSL Router to one of the LAN port, not to the WAN port. Additional networking devices like network printers, servers or scanners can be plugged to one of the free LAN ports and will be integrated in the IP segment of 192.168.1.X.

Installation Note

The AccessPoint as well as the ADSL Router have routing capabilities. Therefore it is suggested to operate the AccessPoint only as a Wireless Bridge. Connecting the ADSL Router to one of the LAN ports will put the AccessPoint into the bridging mode. The network management will therefore be handled by the ADSL Router.

ADSL Router:

-DHCP Server

-managing the PPPoE session

AP-600RP-USB:

- handling the wireless LAN (WLAN) access