
Primary Slave Submenu of the Main Menu
The Primary Slave submenu is for the internal
M a i n M e n u
will not need to modify these settings, they are displayed for your reference.
Note that actual drive labels shown may vary.
PhoenixBIOS Setup Utility
Main
|
|
|
|
|
| Primary Slave | Item Specific Help |
| |
|
|
|
|
|
| Type: | [Auto] | Select ATA/ATAPI drive |
|
|
|
| installed here. |
|
| [Disabled] |
|
| |
| LBA Mode Control: | [Disabled] | [Auto] |
|
| PIO Transfer Mode: | [Standard] | The BIOS |
|
| DMA Transfer Mode: | [Disabled] | drive on boot time. |
|
|
|
| Except [Auto] |
|
|
|
| You enter parameters of |
|
|
|
| the drive. |
|
|
|
| [None] |
|
|
|
| The drive is disabled. |
|
|
|
|
|
|
|
|
|
|
|
F1 | Help | Select | Item |
ESC | Exit | Select | Menu |
Change | Values | |
Enter | Select | ▲ |
F9 Setup Defaults
F10 Save and Exit
Figure 3. Primary Slave Submenu
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field | Options | Default | Description | |
|
|
|
|
|
|
|
|
|
|
Type: | ■ | Auto | [Auto] | Selects the ATA/ATAPI device type. Select Auto to have the type |
| ■ | None |
| automatically identified by the BIOS at POST. If None is selected, all |
| ■ |
|
| of the following |
| ■ | Hard Disk |
| Hard Disk for appropriate drive type installed at this connection. |
|
|
|
|
|
■ | Disabled | [Disabled] | This option cannot be changed when Auto is selected. Specify the | |
Transfers: | ■ | 2 Sectors |
| number of sectors per block for multiple sector transfer. |
| ■ | 4 Sectors |
|
|
| ■ | 8 Sectors |
|
|
| ■ | 16 Sectors |
|
|
| ■ | 32 Sectors |
|
|
| ■ | 64 Sectors |
|
|
| ■ | 128 Sectors |
|
|
|
|
|
|
|
LBA Mode | ■ | Disabled | [Disabled] | Enables or disables Logical Block Addressing in place of Cylinder, |
Control: | ■ | Enabled |
| Head, Sector addressing. This option cannot be changed when |
|
|
|
| Auto is selected. |
|
|
|
|
|
9