Fujitsu C1320D manual Address 400 43F, 480 4BF Fast Infrared FIR port is Enabled 500 53F 580 5BF

A d v a n c e d M e n u

Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu

Menu Field	Options	Default	Description
I/O Address:	• 400 - 43F	[400 - 43F]	Allows user to set the infrared port base I/O address when
	• 480 - 4BF		the Fast Infrared (FIR) port is Enabled.
	• 500 - 53F
	• 580 - 5BF		(Note that if there is a conflict between the port interrupts
			or addresses, asterisks will appear adjacent to the affected
			port names to alert you to the fact. In that case, make a
			different selection.)
DMA Channel:	• DMA 1	[DMA 3]	Select the direct memory access channel for fast infrared
	• DMA 3		(FIR).
Parallel Port:	• Disabled	[Enabled]	Configures the parallel port using either no configuration
	• Enabled		(Disabled), a user defined configuration (Enabled), or by
	• Auto		allowing the BIOS or OS to choose the configuration
			(Auto).
Mode:	• Output Only	[Bi-directional]	When the parallel port is enabled this option is available
	• Bi-directional		allowing the user to set the mode for the parallel port. Bi-
	• ECP		directional allows two-way transfer of information
			between your notebook and a connected parallel device.
			Output Only (Half Duplex) allows information to be trans-
			ferred in only one direction, from your notebook to the
			printer or similar device. ECP Mode allows communication
			with the ECP class of parallel I/O devices. Check your
			device documentation for the proper setting.
I/O address:	• 378 - 37F	[378 - 37F]	Allows user to set the parallel port base I/O address when
	• 278 - 27F		the parallel port is Enabled.
	• 3BC - 3BF
Interrupt:	• IRQ 5	[IRQ 7]	Allows user to set the parallel port interrupt when the par-
	• IRQ 7		allel port is Enabled.

13