Fujitsu C1320D manual Serial ATA Port 0 Submenu of the Main Menu, Serial ATA Port 0 Master Submenu

L i f e B o o k C S e r i e s N o t e b o o k B I O S

Serial ATA Port 0 Submenu of the Main Menu

The Serial ATA Port 0 submenu identifies what Serial ATA/IDE devices are installed.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main

Serial ATA Port 0 [FUJITSU MHT2040BH-SATA]				Item Specific Help
Type:	[		]	Select Serial ATA/IDE
		Auto
		LBA Format		drive installed here.
Total Sectors:	78140160
Maximum Capacity:	40008MB			[Auto]
				The BIOS auto-types the
				drive on boot time.
				[None]
				The drive is disabled.

F1	Help	Select	Item	-/Space	Change	Values
ESC	Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 2. Serial ATA Port 0 Master Submenu

F9 Setup Defaults

F10 Save and Exit

Menu Field	Options		Default	Description
Type:	n	Auto	[Auto]	Select Auto to have the type of Serial or Parallel ATA device automatically identified
	n	None		by the BIOS at POST. If None is selected, the following Set-up items do not appear.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk
Maximum Capacity:	---		---	The maximum capacity of your hard disk

6