Fujitsu C6577 manual Infrared Port, Wireless Infrared IR Mouse Receiver, Microphone Jack

L i f e B o o k C S e r i e s – S e c t i o n F o u r

C A U T I O N

Due to the ongoing changes in USB technology and standards, not all USB devices and/or drivers are guaranteed to work.

INFRARED PORT

The Infrared IrDA 1.1 (4Mbps) port allows for wireless data transfer between your LifeBook and other IrDA- compatible devices, such as another computer or a printer, without the use of a cable. (See figure 2-6 on page 13 for location)

It is important to keep in mind that while carrying out this form of communication, both devices must be placed so their infrared ports are directly facing each other without obstruction. The devices must also be separated by at least 6" but no more than 36" for maximum performance.

The following conditions may interfere with infrared communications:

■A television, radio remote control unit, or a wireless headphone is being used nearby.

■Direct sunlight, fluorescent light, or incandescent light shines directly on the port.

C A U T I O N

Do not move either device while communication is active as it may interrupt data transmission.

C A U T I O N

Be careful not to scratch the infrared port lens. Scratches, dirt, or other surface marks can degrade operation.

P O I N T

With Windows 98 Second Edition, you can use the Infrared Recipient application for infrared file transfers. LapLink Professional software can also be used

for infrared file transfers.

WIRELESS INFRARED (IR) MOUSE RECEIVER

The Wireless IR Mouse Receiver allows you to use an optional wireless Infrared Mouse (IR Mouse). The optional IR Mouse communicates directly with the IR

Mouse receiver without the use of a cable. (See figure 2-3 on page 9 for location)

MICROPHONE JACK

The microphone jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8"(3.5 mm) mono mini-plug in order to fit into the microphone jack of your LifeBook. In order to connect a microphone follow these easy steps: (See figure 2-5 on page 12 for location)

1.Align the connector with the port opening.

2.Push the connector into the port until it is seated.

STEREO LINE-IN JACK

The stereo line-in jack allows you to connect an external audio source to your LifeBook, such as an audio cassette player. Your audio device must be equipped with a 1/8" (3.5 mm) stereo mini-plug in order to fit into the stereo line-in jack of your LifeBook. In order to connect a external audio source follow these easy steps: (See figure 2-5 on page 12 for location)

1.Align the connector with the port opening.

2.Push the connector into the port until it is seated.

P O I N T

The stereo line-in jack will not support an external microphone.

C A U T I O N

Turn down the audio volume when connecting electronic devices to the line-in jack. The internal speakers might break if unexpected large sounds are inputted.

DIGITAL AUDIO-OUT CONNECTOR

The digital audio-out connector allows you to download digital audio to Sony or Philips MiniDisc players. It uses SPDIF (Sony Philips Digital Interface) format. Please use the following setting when using the digital audio-out connector. (See figure 2-5 on page 12 for location)

1.Click on Start, Settings and then click on Control Panel.

2.Select Yamaha Ds-XG Audio Configuration.

52