Power on Self Test Messages

The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. The most common errors are marked with a #. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance.

nnnn Cache SRAM Passed

Where nnnn is the amount of system cache in kilobytes success-fully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed.)

*Diskette drive A error or Diskette drive B error

Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the drive is defined with the proper diskette type in the Setup Utility, (See BIOS Setup Utility on page 33 for more information) and that the diskette drive is installed correctly. If the disk drive is properly defined and installed, avoid using it and contact your support representative.

*Extended RAM Failed at offset: nnnn

Extended memory not working or not configured prop- erly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is prop- erly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative.

nnnn Extended RAM Passed

Where nnnn is the amount of memory in kilobytes successfully tested.

*Failing Bits: nnnn The hex number nnnn

This is a map of the bits at the memory address (in System, Extended, or Shadow memory) which failed the memory test. Each 1 (one) in the map indicates a failed bit. This is a serious fault that may cause you to lose data if you continue. Contact your support representative.

*Fixed Disk x Failure or Fixed Disk Controller Failure (where x = 1-4)

The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault

T r o u b l e s h o o t i n g

which might cause you to lose data if you continue. Contact your support representative.

*Incorrect Drive A type – run SETUP

Type of floppy drive A: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency.

*Incorrect Drive B type – run SETUP

Type of floppy drive B: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency.

*Invalid NVRAM media type

Problem with NVRAM access. In the unlikely case that you see this message you may have some display prob- lems. You can continue operating but should contact your support representative for more information.

*Keyboard controller error

The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.

*Keyboard error

Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.

*Keyboard error nn

BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative.

*Monitor type does not match CMOS – Run SETUP

Monitor type not correctly identified in Setup. This error probably means your BIOS is corrupted, run the setup utility and set all settings to the default conditions. If you still get this error, contact your support representative.

#*Operating system not found

Operating system cannot be located on either drive A: or

drive C: Enter the setup utility and see if both the fixed

disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard

C6577 specifications

The Fujitsu C6577 is a versatile and high-performance device designed to meet the growing demands of both business and consumer users. As a sophisticated mobile computing solution, it boasts a range of features and technologies that set it apart in the competitive market.

One of the standout characteristics of the Fujitsu C6577 is its powerful processing capabilities. Equipped with the latest Intel processors, the device ensures quick processing speeds and seamless multitasking, allowing users to run demanding applications and perform resource-intensive tasks without lag. This makes it ideal for professionals who need to handle complex workloads efficiently.

Display quality is another critical aspect of the Fujitsu C6577. It features a vibrant and clear high-definition display, which enhances the visual experience for users, whether they are watching videos, working on graphics-intensive projects, or simply browsing the web. The screen offers excellent color accuracy and viewing angles, making it suitable for various environments.

In terms of connectivity, the Fujitsu C6577 does not disappoint. With multiple USB ports, HDMI output, and support for the latest Wi-Fi standards, users can easily connect to a variety of peripherals and networks. This level of connectivity is essential for those who rely on external devices and need to stay connected while on the move.

Battery life is always a concern for mobile devices, and the Fujitsu C6577 addresses this with robust energy-efficient technology. Users can enjoy extended usage without frequent recharging, making it perfect for long workdays or travel. Not only does this enhance productivity, but it also contributes to the overall convenience of the device.

Security features integrated into the Fujitsu C6577 include biometric authentication, which provides an extra layer of protection for sensitive data. This is particularly important for businesses that handle confidential information, ensuring that only authorized users can access critical files and applications.

Additionally, the Fujitsu C6577 is designed with a sleek and durable chassis, combining aesthetics with resilience. This makes it an appealing choice for users who value both style and functionality.

In summary, the Fujitsu C6577 stands out due to its powerful processor, high-quality display, excellent connectivity options, long-lasting battery life, advanced security features, and stylish design. These characteristics make it a top choice for both professionals and everyday users seeking a reliable and efficient mobile computing device.

Fujitsu C6577 manual Power on Self Test Messages

Models: C6577