Fujitsu CD1000 manual 28

Other information

Mode	Problem	Causes	Remedial action	Refer to
			to take	page
	The disc cannot	Is an extra label or seal applied to the disc?	Do not apply labels or seals to	11
	be inserted.		the disc.
	The disc is
	ejected as soon		Try inserting another disc.
	as it is inserted.
		Are there rough edges, deformations or	Remove any burrs.
	Or, the disc cannot			11
	be ejected.	damaged areas on the disc?	Do not use a deformed or
			damaged disc.
	The disc cannot
	be changed.
CD	Sound skips	Is the disc damaged?	Try another disc. Do not play	11
		(scratched, warped, etc.)	a damaged disc.
	around.
		Is the disc clean?	Clean the disc.	12
	Sound is
		Is the player mounted at a proper angle?
	intermittent.		Have your dealer check it out.	—
		Is the player mounted loosely?
	Sound is bad in
	quality.	Are you driving over a rough surface?	Avoid playback while driving	8
			over rough surfaces.
	The disc cannot		Press the [SOURCE] and
		Is the [ ] button locked?	[ ] buttons simultaneously	—
	be ejected.
			for several seconds.
		Is the antenna retracted?	Extend the antenna.	—
		Is the tuner correctly tuned to a station?	Tune to a station.	17
			Tune to a local station.
		Are you driving out of the service area of	(Please note, there may be
			no local stations servicing the	17
	Receives no	your preset stations?
			area where you are currently
	stations, or
Tuner			driving.)
	receives static
		Are you operating other equipment such as	Avoid operating such
	noise.			—
		computer, or a mobile phone, in your	equipment while using the
		vehicle at the same time as your receiver?	receiver.
		Other problems may include a loose or	Have your authorized
		disconnected antenna cable, a bad antenna	Eclipse retailer check the	—
		cable or a bad wiring.	problem.

28