Add-on modules / Upgrading
Exit
Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI extension boards) are still supplied with power.
Replacing processor
Technical data
•Pentium 4 with 400/533 MHz Front Side Bus in the mPGA478 design up to 2.4 GHz
•Celeron with 400 MHz Front Side Bus in the mPGA478 design up to 2.0 GHz
Removing and installing processors
ÊRemove the fan that there may be and the heat sink.
3 | 2 | 4 | 5 |
1 |
|
|
|
|
|
| A |
ÊPull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
ÊRemove the old processor from the socket (3).
ÊInsert the new processor in the socket so that the angled corner of the processor matches the coding on the socket (A) with regard to the position (4).
The angled corner of the processor can also be at a different location than shown in the i illustration.
ÊPush the lever back down until it clicks into place (5).
8 - English |
