Fujitsu D1544 technical manual Upgrading main memory, Installing a memory module

Add-on modules / Upgrading

Upgrading main memory

Technical data

Technology: DDR 266 unbuffered DIMM modules 184-Pin; 2.5 V; 64 Bit, no ECC

Size: 128 Mbytes to 1 Gbyte DDR 266 SDRAM

Granularity: 128, 256 or 512 Mbyte for one socket

At least one memory module must be installed. You may only use up to two double-sided or two single-sided memory modules for DDR 266.

Memory modules with different memory capacities can be combined.

!	You may only use unbuffered 2,5 V memory modules. Buffered memory modules are
	not supported.
	DDR-DIMM memory modules must meet the PC2100 specification.
Installing a memory module

2

2

ÊPush the holders on each side of the memory compartment outwards.

ÊInsert the memory module into the location (1).

ÊAt the same time flip the lateral holders upwards until the memory module snaps in place (2).

A26361-D1544-Z120-1-7419 English - 10