Fujitsu D2530 technical manual Batteries

Notes on safety Important notes

V● Components can become very hot during operation. Ensure you do not touch components when making extensions to the system board. There is a danger of burns!

●Transmisson lines to peripheral devices must be adequately shielded.

●To the LAN wiring the requirements apply in accordance with the standards EN 50173 and EN 50174-1/2. As minimum requirement the use of a protected LAN line of category 5 for 10/100 MBps Ethernet, and/or of category 5e for Gigabit Ethernet is considered. The requirements of the specification ISO/IEC 11801 are to be considered.

●Never connect or disconnect data transmission lines during a storm (lightning hazard).

Batteries

VCAUTION!

●Incorrect replacement of lithium battery may lead to a risk of explosion. The batteries may only be replaced with identical batteries or with a type recommended by the manufacturer.

It is essential to observe the instructions in chapter “Replacing the lithium battery”.

8 Technical Manual D2530 (Econel 200 S2)